- JONSBO/JONSPLUS Z20 Black Micro-ATX Mini Tower PC Case,with Detachable Carrying Handle, Mini Size, High-Performance Hardware Compatible, Support 240AIO, H160mm Cooler, Black

I just wanted to give a shout-out to this brand and their product before I build (orange version). Though I had never heard of them before, they seem to know what they doing and have an intuitive grasp for how to effectively blend Form and Function. I've uploaded some photos from the unboxing, one which includes a view behind the removed side-panel and an example of their cable management accommodations (though there are more within the case body). This 'use-case' is for a small video production studio and I needed it to fit on a short-scale skinny table that I'm using as the desk, which would also snugly house my micro-ATX motherboard. Needed room for the camera and the lights, afterall! Honestly, it's a lot nicer than I was even expecting - particularly for this price. If you were on the fence about grabbing one before they run out, I'd highly recommend it! (Will upload more photos and commentary once the build is complete) ==== UPDATE: Well, my view on the manufacturers and designers of this product have not changed, but have actually improved somewhat - or let's say, I was pleasantly surprised. I have seen some reviews stating that the instructions are not clear. I emphatically disagree. They ARE minimalist, but you can tell a lot of thought went into the point of view of the person reading the instructions, and how they were laid out, such that an average builder could mostly understand and not have to guess. They label ALL of the screws and components with their own alphabetic letters (pictured), separate each piece-group into a bag with the letter actually printed on it and, they provide spare parts of which I actually did need one - and even give you multiple arrangements for how to hang your power supply. I was able to follow the instructions from beginning to end and I actually haven't done an in-case build for a long time. My last build was a TEST BENCH and you can see some photos for that if you look at my other reviews. SOME THINGS TO CONSIDER: The quarters ARE tight in the case of a Micro-ATX, particularly at the bottom of the case (pictured), in that there isn't much clearance between the mobo and the case itself. This was only an issue when I attempted to connect the front panel wires included in the case. Speaking of which, you want to make sure your motherboard has the USB-C front-panel pins on it (wire is pictured), because mind didn't, and now the wire is just kind of hanging-out! (not their fault) But even these wires are labelled as well and the directions are very clear on which is which, as they're all differently-sized as well. That being said, you may want to connect such components as may be required to interact with any of the pins on the bottom edge of your mobo BEFORE you screw it into the case, it just might be a little bit more difficult to get to afterward. But not impossible. I stand by my assessment that for this price range, and even significantly above it, this is a very well-designed and sleek product, as well as being thoughtfully put together and presented to the customer. I will upload some additional photos of the bags and the instructions for now, and when my lighted fan finally comes in, the finished build. For now, I'm just raw-dogging it with the Heatsink block, but no fans (except the PSU)! And yes - it still works. My temps stayed in the 40-50 range at most, and often far below. Pretty amazing, actually. (note on PSU: I am NOT using a modular power supply unit on this build, repeat am NOT, and yet I still had room for all the cables in that little management cubby on the back which is pictured. So even if you have a power supply for which you cannot remove/obviate unnecessary cables from the brick, they still managed to all fit here. And I will add that to my pictures when the fans arrive as well. Thought that might be something worth mentioning.)

A pleasure to work in, though I had to re-install fans couple times to get cable right. Extremely good air flow with 2 BeQuiet 140s on bottom and top! (I disposed the dust filters except for bottom.) Theralright Peerless Assassin works nicely. Handle works nicely to keep people from putting things on top blocking air flow. Excellent sturdy build quality, at this price. My 1st micro-atx after 30+ builds, and I'm a fan!! Mobo runs much cooler than ITX with more features and lower cost. This case is very compact!!!

This is a well built and sturdy case, its cable management is near perfect for what it is. USBs are a little lacking so make sure you have a good amount on back of Motherboard, but there is what you see in the picture. The Power button is unique and neat but it almost like a unfocused laser. Pay attention to all of the parts in the case as it has some nice extras that most wouldnt notice like GPU Riser. I would highly suggest a modular small form power supply for the extra space and fitment but the full size will work. Overall im very happy with the quality, the value, the airflow and the functionality and it's a very nice looking case. good job Jonsbo

What an amazing little case! Small yet extremely sturdy. The all metal design is perfectly sleek and feels heavy in a nice way. I would almost say it's underpriced for the material quality you receive. A few recommendations for those eyeing the case. Plan plan plan and then plan again. It is truly SFF. I don't have the biggest hands and even I had issues maneuvering inside it. Things get tight real fast. Make sure to read the instal guide before you start. Everything MUST be done in a specific order. Also get your cable management on point. Has excellent 5 fan capcity but if you are like me and have a thicker GPU 2.5 or 3 slot (Asus dual Radeon 7600) you'll need to pick up some ultra thin fans for the bottom of the case (15mm)

It's a great sleek metal frame compact case for a MATX build. Packaging was excellent and well protected. Got this on sale, so price was great. This was the first time I built in case this small, so it was a learning experience. The side panels came off easily. Some of the screws inside the case were screwed in too tight, so I ended up stripping some of the screw heads. Getting the motherboard in was a little difficult getting the screw holes to match up. I think I spent an hour trying to get all the screws in, but the case had one less motherboard screw hole to what my board had. This case has some sharp edges inside so that's something to watch out for, because I did cut my finger. This is a great compact affordable case. Build quality is solid. Easy cable access and well-designed cable management section on the side. There is an additional dust filter for the back of the case, if you do want to pull air in from the back. For my build I use the back for exhaust. I don't need the handle, but it's nice to have it as an option. This is my build so others can see what fits inside -ASRock B860M X Wifi 6E DDR5 Motherboard -Crucial Pro DDR5 32GB -Arctic P14 Pro Reverse A-RGB 140 mm fans (2 installed on the bottom) -Arctic Freezer 36 A-RGB CPU Cooler -Termaltake Toughpower GT 750W ATX 3.1 Standard Power Supply -Asus Dual Geforce RTX 5060 8GB

This was my very first PC build and from someone with no previous experience in this hobby. The quality for this is great. From the coating, panel thickness, cut quality, and components used, everything is pretty much perfect. Here is the parts lineup that I used for the build: ASUS 3060 (dual fan), Thermaltake smart 600w PSU (Non-modular), ASRock B550M-C, ryzen 9 5950x, WD Blue 1Tb HDD, 3 Be quiet 120mm lux wings (can't remember if that's the exact name) intake fans (two bottom mounted, and reversed the rear to be an intake rather than exhaust), 32gb Corsair vengence ram, and an Arctic Liquid Freezer III 240mm AIO (stock without modification to tubes) with 2 120mm PW12 Pros I believe. These are the main space consuming components. With that, I was able to put everything together easily in this case given it's well designed layout with ample space for cable management in around 4 hours (still new to this) but there was no problems that were of the case's fault. I loved this build and how it all came together. This is a very forgiving case in my opinion and would be good for people new and experienced to build in and are looking for high quality and functionality. Not to mention, cooling temps for my CPU are rarely above 73c under a gaming load with very very brief spikes of 76c (not something I would believe is even remotely related to the cases design). For the GPU, temperatures peak at 71c and are often below that even under load. Ambient case temperature for my situation is 27c while idle and maybe 34c while under load. So airflow is also a non-issue with this case design (something I was worried about). Fans stay quiet even under load (rarely do they exceed the 65%-75% power window) but that's subjective I suppose. So I consider this a 10/10 amazing case. (The handle also is a nice solid touch for if I want to use this for gaming on my TV it's easy to move). For reference, the temperatures were obtained under load running the following games with the settings nearly maxed out: Monster Hunter Wilds and World, Helldivers 2, 7Days to Die, and Space Marines if it's of any value or consideration. Buy it! Won't regret it! (Plus you get some extras in a nice package which also have good build quality and are very functional if you need them).

Case is being used for AMD Ryzen 7700 with Radeon RX 9070 (full build below) If you're looking for a great mini tower case this one is well worth the money. It's well put together, no sharp edges and lots of thought put into the design. Make no mistake, it's a tight fit and you should learn from my mistake of putting the fans in last! That was a pain - instead, get the motherboard fitted along with the CPU but wait on putting in the heatsink - take the time to add in your fans and route their cables carefully thinking about which goes where and how they'll be controlled (the power attachment is marked). The top fans (I avoided water cooling this time round) attach to a convenient slide out tray controlled by CPU-OPT, the bottom fans are screwed directly into the case controlled by SYS-1 (Gigabyte MB). Bottom fans are intake, upper fans are exhaust. Take your time, when the power cables are being routed it gets real tight real fast! I ended up carrying over a 2.5" SATA SSD and the case has a special bracket to neatly mount it behind the PSU - brilliant piece of design! The instructions are clear and easy to follow, I recommend taking time for a quick read through before assembling. Dust covers are magnetic and time will tell if they are sufficient. I doubt I'll be taking this anywhere but the built in handle makes it easy to move around. I've already clocked a few hours of Elite Dangerous and the CPU/GPU have not broken 40C with the fans all tuned to be 'silent'. Full build: ARCTIC P12 Pro A-RGB - Powerful Premium Fan, 120 mm PWM Fan with Y-Cable Splitter, 600-3000 RPM, 0 RPM <5% PWM, 5V Digital RGB, Fluid Dynamic Bearing, 4-Pin - Black Cooler Master V850 SFX Gold ITX SFF Modular Power Supply, 850W 80Plus Gold, ATX 3.1 | 90° | PCIe 5.1, Designed Ready Nvidia RTX 5080 | AMD RX 9070 XT, Customized Cable, 100mm|3.9", 10-Year CORSAIR VENGEANCE RGB DDR5 RAM 32GB (2x16GB) 6400MHz CL36-48-48-104 1.35V Intel XMP 3.0 Desktop Computer Memory - Black (CMH32GX5M2B6400C36) PowerColor Hellhound AMD Radeon RX 9070 16GB GDDR6 Crucial P510 1TB Gen5 NVMe SSD, Up to 11,000 MB/s, PCIe 5.0 M.2 2280 SSD, Internal Solid State Drive, Compatible with Laptop, Desktop, +Acronis Software - CT1000P510SSD8-01 GIGABYTE B850M Gaming X WIFI6E AMD AM5 LGA 1718 Motherboard, mATX, DDR5, 2X M.2, PCIe 5.0, USB-C, WIFI6E, 2.5GbE LAN, EZ-Latch, 5-Year Warranty AMD Ryzen 7 7700X 8-Core, 16-Thread Unlocked Desktop Processor be quiet! Pure Rock Pro 3 LX CPU Air Cooler | 6 High Performance 6mm Heat Pipes with HDT Technology | 120mm Quiet ARGB PWM Fan | AMD:AM4 AM5/Intel LGA 1700/1150/1151/1200 | Black | BK043

This is a really fantastic, well-built mATX case. All metal and glass construction. No, there are no quick release panels, so the build process is slightly lengthier. But, as a result, the whole thing is well-engineered and rock solid. Thermal management is fine (I'm air cooling a slightly overclocked Ryzen 7700 with a Peerless Assassin Mini, plus four Silent Wings 4 case fans). I moved into this case as part of an upgrade to AM5. I kept my ATX PSU and it fits without issue. But, my GPU is on the shorter side (XFX Swift 210 RX 6600), so I am anticipating some challenges with cable management if I were to swap that out. Right now, the lower right-hand corner is freed up for plugging into the PSU and storing excess cable, but a longer GPU might interfere with that. YMMV. All in all, I'm really happy with this case, even if it means finding some creative solutions to packing everything in.

This is very well packaged with all items and explanation of best steps for installation. It is all set out so nicely.

Tiene muy buen espacio para el acomodo de cables la verdad fue mejor de lo que esperaba. Le cabe bien una gráfica rx 9070

Built a Ryzen 5 9600X cpu with a Gigabyte Aero 5070 gpu. Noctua NH-P1 cpu cooler. Gigabyte B850M Aorus Elite Wifi 6E Ice motherboard. Lian Li SP750 PSU. WD Black SN850X 4tb nvme ssd. G.Skill Trident Z5 Royal Neo CL28 2x16gb RAM Kit. Phanteks M25G2 2x140 mm reversed, 2x140mm standard, and a 1x120mm standard fans. Finally a 5.2 inch IPS screen found on amazon via Jalzdieod brand (sounds weird.. worked flawlessly). I love it. Has a handle. Everything fit perfectly with some planning and effort. Check pcpartpicker and the manuals for sizing. I really like the Jonsbo/Jonsplus style. They have many cases to check out. This was my favourite due to it being the smallest mATX I could find without being some expensive small batch special order thing. I highly recommend as it was fun to build in and had just enough space for everything I wanted to put in for a mobile PC build to game on. It weighs as powerful and sturdy as it feels!

salio mejor de lo que esperaba, pense que era de aluminio y es de acero

Love the compact design of this build, it takes up so little space on the desk. The design is very interesting so it took some finessing / trial and error to get all my components to fit right. But in the end, I managed to cram in a 3-fan graphic card (albeit a smaller one), full size ATX PSU, 240mm AIO cooler, and enough fans to keep the whole system very cool, absolutely ridiculous. Cable management was also excellent, as I was able to hide most of the extra wires out of sight. It was not the easiest build that I've done, but seeing the final product sure was rewarding, and the wife absolutely adores her new PC. Not a lot of black/pink cases available out there, so huge kudos to JONSBO for making this one even though it's going to be a slow-mover. 5 STARS!