Biometric Gun Safe,Gun Safe for Handgun 0.1S Quick Access Gun Safe for Nightstand with Fingerprint PIN Code and Key,Hidden Gun Safe Box for Home Bedside Car

I now have a metal drawer that responds to a quick scan of my fingerprint which causes it to open rapidly, yet still smoothly. Brilliant!

It's much nicer than I expected for the price. Fingerprint button works great. It has a good hefty weight to it as well. Feels fairly solid. Spring loaded, so it opens fast. I would definitely recommend this.

I have a few issues with this gun locker, the primary one being that the slots that are used to mount it to the wall are large enough to stick a wire thru and press the reset button on the back of the safe, allowing you to reset the combination while it is closed. The manual backup lock is not particularly impressive either and the overall construction is just simple sheet metal. The installation process was a bit tricky in that there is a single little screw that goes from the inside of the safe to the mounting bracket to hold it onto the bracket so you can't just simply take it off the wall. Installing this screw can be a bit of a pain, as if you drop it when trying to install it can fall down behind the drawer and take a lot of jiggling of the safe to get it back out. The fingerprint reader works about half the time, and seems to be quite finicky about getting the right angle of read, which is not exactly ideal considering it is the fastest way of opening the safe. Also the beeping noise it makes by default I dislike as you don't want to make a loud sudden noise when reaching for your pistol. The blue light inside as well I think would be better if it were red to not harm night vision as much. It is spring loaded which is nice in that it is quite fast to use. I just think for a firearm storage solution it is a bit too low security for my preference.

Great item to keep it safe

Bought this and set up but after unlocking the sling doesn’t push it out I had to turn safe on the side to get door to open, I’m returning obviously.

Biometric gun safe fits full size, compact, and one extra mag-inside padding to protect your items. Fingerprint recognition makes to quick access and options for 30 (!!) users- set up was easy when following the link instructions provided. Also comes with digital password key and spare key as additional options. Has a mounting bracket for your preferences and desired locations. Unit is lightweight for a safe but very durable with steel plate construction. Description states a pry-resistant door and the looks seem legit. Easy to open and not sure yet about keypad battery durability and lasting ability. A must have to keep family and yourself safe, while complying with state laws and regulations.

I had a lot of questions before I ordered it, and I wanted to make sure that I covered those questions for anyone else. My photos cover unboxing and pretty much the entire manual to answer all those questions.Photo 1 is the side and photo 2 is the front of the box. The unit is quite heavy and sturdy, and you know that before even opening the lid.Photo 3 is what appears when you open the lid, and photo 4 lifts that piece of styrofoam to reveal the safe and instruction manual. As the other photos show, there are also batteries and keys included.Photos 5, 6, and 7 show the unit from various angles including the mounting bracket. Photo 8 begins coverage of the manual.So . . . the questions I had as I placed my order:Where do I mount it, and how? Where is the key lock? What mounting options do I have? Can it hold anything I choose?Well, the instructions state that you reach inside the safe and can spin off a knob that removes the mounting bracket from the safe. The thumbscrew can be reached only when you have your hand inside the safe, and then you remove it. That allows you to slide the bracket such that it hits some slot openings in the side of the safe and comes out. The thumbscrew is literally a pin preventing the mounting bracket from moving up and down. I found the thumbscrew easy to find on the inside wall of the safe and easy to remove - it had no real stress on it.Both sides of the safe (left and right) can take the mounting place and thumbscrew. However, the mounting plate's upper panel where you mount into a sturdy surface (likely wood) is the ONLY location for the plate - it does not allow mounting to the back or beneath the safe - only on top.So you will screw the upper part of the mounting plate into a surface and then slide the safe onto it, and pin it together with the thumbscrew. The mounting location will be ABOVE the safe.The key lock is on the BOTTOM and in the REAR of the safe. It operates easily, but you want to allow enough clearance for you to get the key into the lock.The foam is cut to accept a gun, but the instructions tell you to cut the foam to your needs, so flexibility is there for what you secure.My bottom line - for you, I suggest reading the instruction manual. This thing is impressive, well built, and well designed. Some things I wish were different - the combination can only use 1-4 as numbers within it. I wish it had a full ten number keypad. The mounting is clever and well-designed, but having the key hole on the bottom means I need an air gap beneath it, which means that I give leverage to anyone wishing to remove it - I can't put it flush against something below or I block the key hole. I did have an intended location in mind when I ordered it, but the key on the bottom and the need to only attach the mounting bracket at the top mean that it won't fit that application. I think it's a great unit and I intend to use it, but I have to create a new plan on where and how to mount it now that I have that information.My advice to you is this - it's a great way to store things safely, but please look over the manual pages that I shared and be sure it will work in your intended application. If it fits your intended needs, then I think you'll love it. I'm not sending it back - I'm quite happy with it overall, but just need to re-think my mounting concept now that I know the details that I shared. Hopefully I have you thinking over your mounting concept before buying it. You'll also be pleased and impressed upon arrival, but the placement of the keyhole on the bottom means it cannot sit flush against a wide, solid surface. There are workarounds, but please consider them before committing.