Masterbuilt MB20100112 Slow and Cold Smoker Accessory Attachment, 10 x 10 x 18 inches, Black

This is as well built as the 30" Masterbuilt smoker I installed it onto. I had no big problems mounting or using it, but I'm a retired mechanic and consummate tinkerer. If you are neither, you may struggle a little bit getting hooked up. Have your wife help hold the J-bolt while you fasten the wing-nut. This thing really smokes, did a beautiful job on jerky. (2 hrs. smoke, 5 hours total cook time @160.) I had to whack the thing a couple of times when it quit smoking to dislodge the chips in the feed chute. Keep the chute wire brushed clean and this will be less of a problem. This slow smoker attachment should be purchased when you but the 30" or 40" smoker. Withour it you will not be able to produce good smoke at low temperature settings. If you plan to smoke cheese, this is a must. It only pulls 150 watts, no power issues whatsoever.

This smoker is excellent! It works best with pellets. Amazing volume if smoke.

Die Heizspirale brannte beim zweiten Mal benutzt leider direkt durch.

I love being able to smoke items at low temps. Highly recommend it.

Once properly installed this works like a champ.I have seen many negative reviews that this doesn't stay secure in the smoker. It took me a few tries to get it properly mounted, but once done it is secure. There is an included "J hook" and butterfly nut that is used for mounting, and it is not an easy task as you cannot see nor feel the hook due to the smoker heat shield. With a bit of patience you can get the hook properly secured. I would advise not threading the butterfly nut at all until after you are confident that the hook has caught on the inner lip of the chip feeder tube.I have no complaints after properly securing it.I may recommend a small metal scoop to help feed the chips if you have a long smoke going. Feeding by hand is doable, but you may miss the tube with a few chips, and once it is hot you don't want your hands near the feeder tube.