LANSCOERYAcrylic Display Case, Assemble Large Showcase Display Box for Collectibles, with Dustproof & Seamless Display Design, Compatible with Lego C-3PO 76989 21347, 12x10x16inch Thick Black Base

These are so much better than I was expecting, having gotten a similar one from somewhere else in the past, where the lid was the only thing that holds the sides up. The pieces fit together very snugly and the dimensions were perfect. It also came with a plastic coin to remove the film and gloves to keep prints off during assembly which was a considerate bonus.One downside is one connection caused a crack when assembling but I'm planning on putting up a backdrop anyway, so it's not a big deal for me. But you have to use a fair bit of pressure to get the tabs to snap in place, so a good deal of care is needed. Still, I'm very happy with them.

Relatively good price. I didn’t have the same difficulty that other people seemed to have getting the film off. Just scrape very very hard with your fingernail from the corner, or carefully but firmly with the provided tool.

First of all, you better allow an hour to put this together, because most of the time is spent peeling the film off the panels. Better have strong fingernails to do this. Then a lot of time is spent trying to keep the panels from falling in, or trying to get them locked together. Once you have done that, look at all the dust that has clung to the panels! Who wants to start out with dust inside? Time spent on trying to wipe the dust out, while the panels would come undone, another 15 minutes! Never could get it all out. If you plan on displaying something heavy (like I was), DO NOT BUY THIS FOR HEAVY ITEMS! Waaaaayyyyy to FLIMSY! Make sure it fits your item, because once you peel the film off, you can't return it. Definitely not worth the money, or frustration putting it together. DO NOT RECOMMEND BUYING THIS PRODUCT AT ALL!

***edited to add-the seller reached out to find a way to make us happy with this purchase. Increased rating for good customer service. This case is difficult to put together and is quite flimsy. It’s easy to crack the small tabs left exposed after assembly.

Such a good quality case. Comes with twinkle lights, white gloves, and a wipe cloth. Easy assembly too.

I got my mom a special teddy bear for Mother's day and she desperately wanted a case to display. While I was skeptical if it would fit, it fit perfeclty! What I loved the most is that each plastic piece was protected and covered with a film, they provided a dusting rag, gloves so when I put it together I wouldn't leave prints, and some cute thin lights to light up whatever you put inside. Great price for everything you recieve!

I needed a display box for a new figurine and this looked fairly decent compared to others I've looked over on Amazon. I have 2 complaints with this type of display box which is that the protective adhesive on the panels are extremely difficult to remove with the tool provided. I wish they just had tabs attached to the adhesive to make it easier to pull off. The adhesive on the base however was the absolute worst to remove. It has a low quality masking tape texture which tears easily upon adding a small amount of pull force during removal. This frustrated me to no end but luckily I got everything off.The last complaint is that the slots are a bit difficult at first to slide into when assembling the panels. I managed to slightly crack one but thankfully its no bigger than a few millimeters. Once assembled the box looks great and functions as intended. I personally would only use this as a temporary solution or something for non valuable/exclusive figurines. I'm definitely going to invest in something better for my future figurines.

For the price, these are decent little display cases. If you have the room and alot to display, you'll want Detolfs or Moducases for your collectibles, but if you want something smaller to display 1 - 3 pieces somewhere where dust could accumulate like the top of a bookshelf or desk etc. these are perfect. The clarity on the acrylic is very good, its rather sturdy when fully built and i like that theres no extra footprint unlike something like a basketball/football trophy case.What I didnt enjoy was putting it together - the acrylic walls and floor are covered on each side by a protective film that is quite finicky to peel off, even with the included circular piece that is there to help you remove it. Just getting all the film off will take most a good 15-25 minutes. It did have a pair of white cloth gloves that prevent leaving fingerprints but at the same time they make the precision needed to remove the film more cumbersome.I also quite like that the top lifts up rather easily so you can reach in to add or remove stuff.All in all, as a collector with a nice hooked up detolf display, coming down to this to keep a few things on my desk free to dust was a solid purchase. Just be careful when setting up not to scratch the walls and keep a microfiber cloth handy to remove any fingerprints as they will show up, you can use water with a bit of mild soap to clean it so its not hard to maintain either.

Alright , so they might be a little more expensive than other display cases but it's sooo worth it!! Much better quality. Very sturdy. Thick sides. Easy to assemble. Includes cute lights. Has gloves so you don't put prints everywhere. Just ordered a second one since I loved this one so much.

The media could not be loaded. I purchased this item for my personal project of memorabilia. It was easy to assemble, I followed the instructions. The package cane with all that was needed to assemble, including gloves. It is sturdy and looks great in my opinion. Hope this helps, cheers!

Everything fit together perfectly and was easy to assemble.

The item arrived with extra items (gloves, cloth, mini lights) which I appreciate. The seller is very helpful. They are very responsive and provide great customer service.

The actual acrylic that is meant to be used to see through, is matte, and not clear. This is partly due to what seems to be damage on the acrylic, wear and tear over time; thus, the product isn't usable for its intended purpose. Also, the assembly is low quality, with most of the attachments no fitable into the base plates. Do no buy this product.