Question 1

I used a 3gpm water transfer pump that ran fine for about 10 minutes but then lost it's prime & started smoking.  What have you used successfully?

Accepted Answer

I used an inexpensive 1100 GPH submersible Bilge Pump (Brand was Maxzone) hooked up to a 12 volt battery. Ran it for 4 hrs. +, worked great, and pump still works like new!

Question 2

can you dilute this and pour directly into thermostat housing of a Yamaha 150 OB? I can't take my boat out of the water

Accepted Answer

Yes, manufacturer recommends 1:1 dilution with clean water. Static cleaning may require additional time for cleaning, typically 1-2 hours, may require 3 hours at most.

Question 3

can you dilute this to 1-1 and pour directly into thermostat housing?  I can't take my boat out of the water

Accepted Answer

Yes. 
 You didn’t say what type of motors you have?

I made a setup to do a close loop system. Remove your thermostats and reinstall housing. Connect a hose or tubing to thermostat housing and run it to a bucket with a small 1/4 hp water sump pump in a bucket or a 30 gallon trash can is what I used with cleaner solution and then connect a hose to the out flow and run that to the bucket so you can get a full circulation through your cooling system. This set up is I used when I can’t run the motors.
 Don’t by the pump kit they sell. It’s junk. The pump is way to inefficient. 
 The cleaner works really well . Only takes about 30 minutes. You can run longer time but You will be amazed how much crap comes out in a short time. You will need to completely flush the cooling system with clean water after you are done.
Install new thermostats. Thermostats are cheap. Don’t try and just clean the old ones. 
 If you have outboards and can take boat out of the water that’s the easiest way.
 I have a tank that I can lower my motors in and pour the cleaner solution in the tanks but I still remove the thermostats and reinstall the thermostat housings and run the motors for about 5-10 minutes. I do this every 50 hours or so. I run my boat in saltwater.
You need to watch your temperature gauges constantly so you don’t over heat the motors.
The water in the tanks will get hot.

ASIN	B07CPKVY3T
ASIN	B07CPKVY3T
Best Sellers Rank	#29,700 in Sports & Outdoors ( See Top 100 in Sports & Outdoors ) #67 in Boat Cleaners
Brand Name	RYDLYME
Customer Reviews	4.7 4.7 out of 5 stars (346)
Date First Available	May 7, 2018
Item Form	Liquid
Item Volume	4 gallons
Item Weight	38 pounds
Item model number	RYM04
Manufacturer	Apex Engineering Products Corporation
Manufacturer	Apex Engineering Products Corporation
Material Feature	Biodegradable Warning
Material Features	Biodegradable
Model Number	RYM04
Number of Items	4
Part Number	RYM04
Product Dimensions	13 x 13 x 13 inches; 38 pounds
Recommended Uses For Product	Boat Engine Flush, Condensers, Cooling Systems, Heat Exchangers, Marine Water-Side Descaling
Scent	Almond
Size	128 Ounce (Pack of 4)
Special Features	Concentrated
Specific Uses For Product	Boat Engine Flush
Surface Recommendation	Engines
UPC	635238000234
Unit Count	512 Ounce

RYDLYME Marine Biodegradable Descaler (4, Gallon Bottle)

Details

Details

Description

Specifications

Common Questions