Sanding Drum Set for Most Rotary Tools-Includes 138 Aluminum Oxide Sanding Sleeves for Drum Sanders (80,120,240 Grit) and 12 Drum Mandrels-Sanding Bits Tool Accessories with Box

Great set for the price. Use it all the time. Has alot of different pieces that help me finish up my artwork.

Nice to have

This is a steal at$8. It has a middle size drum that I haven't seen by Dremel yet. There are 2 sizes of shanks,for a total of 12 bits,plus plenty of sanding drums,which is coarse,medium and fine grits. PS,A 6pk of Dremel 1/2in sanding drums sell for around $4.

Nice set with a variety of grits in the two drum sizes and a couple of shafts for each. I've have a few of the sanding drums burn away to the rubber of the shaft more quickly than I expected (that's an unpleasant experience and smell), but there are a lot of them at a low price, so I'm not going to stress too much about that. Possibly if heater concern is that the shafts are about ¾ of the diameter of Dremel shafts, so they are definitely not as sturdy, and could theoretically bend or snap but they haven't given me issues. Overall, a reasonable product at a reasonable price.

Always useful for smaller sanding projects.

These things are absolutely horrible. They don’t last that long and they “pop” right in the middle of sanding. When they do you better hope your finger is not near it holding the piece you are sanding! Broke my piece and almost my finger.

I found them to be of good quality. They do a very nice job on the small parts and tight spaces normal sanders cannot reach. I like the wide assortment of spindle sizes for the needs I have. The only problem I had was that the spindles are very small-only 1/16th inch wide. The collet I had in my Dremel would not close that tight, so I had to buy a smaller collet to accommodate the smaller size of the spindles. No big deal and cheap easy fix. Overall, would rate a 5 start.

These fit the arms for the discs haha ever a little tight getting them on.they don’t last very dam long like 10,sec if your sanding rough wood but what do you expect.

It's Christmas time in Dremel Town! Great value for one of the pieces that gets so much use in my kit. This is an excellent item for cleaning inside of large copper pipes prior to applying flux. The one issue in using these is they do wear out over the course of a project but given the large amount offered, work will go very quickly at an affordable price.

The different sized mandrels work well from my cordless drill to my dremal tool. The different grit sanding drums can make my small projects go much quicker.

Generally decent my only issue is the sanding belts fit loosely on some drums I did some minor modifications to make them more snug. Some drums have a vey thin shaft that will bend and put the belt off balance I just use the thicker shaft drums! When they work the sand nicely!

Fall apart seconds after using don't buy

Varied sizes of sanding discs. Works great for my small projects. Fits my rotary tool with no problems.