Description: Allows you to easily remove annoying dents, use slide hammer or bridge puller, according to the size of the body dent, select the appropriate tab, repair dent work. It is environmental protection and it does not damage the original paint. Specifications: Product listing: 1x slide hammer 1x bridge puller 1x Blue hot glue gun 1x rubber hammer 4x Black glue sticks 10x Red puller tabs 5x White Nylon awl 1x Metal Tap Down Pen with 2 Heads 1x Plastic scraper How to use: 1.Clean the surface of the dented area with the release solution (isopropyl alcohol) to remove any dirt or wax. 2.Apply hot glue to tab. Make sure glue is not scalding hot to prevent damage to paint. If glue is too hot, allow it to cool for about 10 seconds on the tab before you apply the tab to the vehicle panel. 3.Allow the glue to set for about 5 minutes prior to using any glue pulling tool.The glue should be hard to the touch at the time you begin repair. 4.Place the paintless dent repair glue pulling tool of choice directly over the dent pulling tab shaft until the female adapter in the center of the dent lifter slides over the shaft of the tab. 5.Slowly press the concave lift handle several times until it achieves the desired effect. As the damage becomes smaller, the size of the indent tab is reduced until the dimples become flat. Use the slide hammer or bridge puller, please use it repeatedly, and continue to reduce the size of the adhesive tab as the size of the dimple decreases. 6. Spray 91% of alcohol on the edge of the glue and peel it off with a plastic spatula. You may need to repeat the steps until you reach the desired result. Tip: Do NOT touch the extruded hot melted glue which is of high temperature. If you have some question about it , please contact with us. Thanks!
Trustpilot
4 days ago
2 months ago
