Smart Lock U200 (Fingerprint Keypad Included), Matter Over Thread, Keyless Entry Door Lock with Apple Home Key and Rechargeable Battery, Supports Apple Home, Alexa and SmartThings, Black

This lock so far has been quite an impressive piece of tech. Based in the US, I have a standard US deadbolt on the door I installed this lock on. Installation was relatively simple. Keeping the front of my deadbolt, where the key is in insterted, I was able to easily remove the back latch, screw in the mount for the Aqara lock using the existing bolts from the original lock, and then I used one of the adapters matching to my deadbolt for the turny-bit. Then I popped on and secured the Aqara lock unit itself. Once physical setup of the hardware was compete, I added my new lock to three seperate ecosystems of choice. First, I checked for firmware updates in the Aqara app. At time of writing this review, 65 is the most up to date firmware available. Then, because I was already playing with the nuanced settings within the Aqara app, I adjusted the volume of the keypad/voice/beeps/etc. I also auto-calibrated the lock within the Aqara app. Then I set up the lock for Homekit/Apple Home because HomeKey is a super cool feature to utilize. I personally had zero issues with setting up this lock in Apple Home, though I am aware some people did encounted issues. Finally I set up the lock to Home Assistant. Both Apple Home and Home Assistant were set up using Matter/Thread with my existing Thread Network. It's important to keep in mind that you're not required at all to use the Aqara app to setup/calibrate, I could have just jumped straight into using Apple Home or HA. Though it's nice to have the option to set up/change different lock settings that are not part of the Matter standard at this time, so the Aqara app works around the current limitations of Matter by being able to adjust specific settings through their app. For actual use, the lock has been fantastic for the time I've used it so far. Fingerprint reader is ~snappy~, and pretty much instantaneous to unlock the lock. The Homekey works as it should and in my observation is as instantaneous as the fingerprint. Inputting a numeric code, has a very slight delay. Though not more than a few milliseconds. When controlling via my integration with Apple Home and Home Assistant, which are using Matter/Thread, it is incredibly quick to respond as well. I was very pleased and impressed with this. And of course, I'm able to use my established key as a back up. My only current gripe with the lock is that in order to update/change settings of the lock and keypad within the Aqara app is that one must establish a phsycial Bluetooth connection to the lock AND then press a button on the keypad to confirm the connection and wake the keypad. I understand potential reasons why this may be required as the keypad likely is put in a sleep state to conserve battery while it is not in active use, however for convenience sake, I wish I could just remotely access and change settings without having to wake the keypad, especially if one already has their lock connected to an M3 hub within the Aqara ecosystem which is meant to be able to provide said remoted access. Battery life of the lock and the keypad will be seen over the course of time as I continue to use this lock in everyday use scenarios. I am not too worried about being locked out, as I am particular to keeping tabs on battery levels as I've used several smart locks over the course of many years. Overall, I'm really enjoying this Aqara U200 Smart Lock. I highly recommend it so far and look forward to further development in the firmware to make it even easier to use and implement than it already is. As the Matter standard matures over time, and if Aqara continues to support this lock during this, the U200 will easily maintain a solid success.

I purchased 5 of these locks to pair with my Aqara Hub M3 for use with Home Assistant. The first three locks paired with no issues. The last two would not pair under any circumstances. I even ordered replacement locks in case they were faulty, and the new locks wouldn't pair either. It almost seems the Hub M3 will only support three locks, but if this is the case, this limitation is not published anywhere. Aqara support is terrible. It is virtually impossible to talk to a human. All support is done via AI agent or email. For me, the back and forth was time consuming and took place over days without a resolution. A month after installation, one of the locks now has a bad motor. Unlocking or locking results in the motor grinding and then an error report. The lock is now broken and it is past the return window. These locks are terrible- the quality is subpar and the support is painfully slow and unable to resolve basic issues. Update Dec 8,2025: 4 of the 5 locks I purchased have now failed in less than a year. The motors make a grinding noise, but they cannot lock or unlock the deadbolt. They've all failed in the exact same way so it's clear that this product has a design defect. Buyer beware, if it works out of the box, it will likely fail after light use.

I’m writing this to help anyone out who may encounter issues with setup or operation. This lock is fantastic. I live in an apartment and use this daily. Tho it was very difficult to get hooked up to matter. I found an article online that suggested to remove the battery and reinsert it, press set and start the matter setup from there. And that seemed to fix the issue. I have been using this lock for about 6 months. Right at the sixth month mark, the lock started to stick and generate a lot of noise when operating. I did find an article online that showed someone else removing the gear box, cleaning it with rubbing alcohol and qtips. And re-lubricating (with superlube synthetic grease) all the gears as they r reinstalled. Taking pictures as u go to ensure it is reassembled properly. You really only need a mini screwdriver set to complete this task in about 15-20 minutes. Doing this will void your warranty. But if u are careful the lock will work better than it did when it was brand new. You can barely hear it now. The lock should be manufactured with a higher quality grease in the gear box housing. I am a high end carpenter with 20 years of experience.

Das Aquara Smart Lock U200 ist leicht zu montieren und einzurichten (W-Lan, keine Bridge) und funktioniert nun seit eine dreiviertel Jahr sehr gut. Es ist ein echter Komfortgewinn und die Einbindung in meine Apple-Home-Umgebung ging quasi automatisch. Jetzt bei Eiseskälte hält die Batterie im NummernPad (hängt außen in der Nähe der Eingangstür) erstaunlich gut und warnt rechtzeitig davor, wenn sie gewechselt werden muss. Das eigentliche Schloss hatte ich einmal zu Beginn aufgeladen (per Powerbank) und jetzt kürzlich wieder. Die hält also sehr lange durch. Ich bin sehr zufrieden mit dem Smart Lock und kann es empfehlen.

L'Aqara Smart Lock U200 è una serratura intelligente che supporta Apple HomeKey e il protocollo Matter, rendendola compatibile con vari ecosistemi smart home come Apple Home, Alexa e Google Home. È un modello retrofit, che significa che può essere installato senza sostituire l’intera serratura. La U200 include un tastierino NFC e il sensore per impronte digitali, offrendo diverse opzioni per lo sblocco, come codice PIN, impronta o smartphone. Esperienza d'uso: L'installazione è relativamente semplice, anche se richiede un po' di attenzione per la calibrazione iniziale. Una volta configurata, la risposta del sensore di impronte è rapida, e l'integrazione con HomeKey di Apple consente lo sblocco con un semplice avvicinamento dell’iPhone o Apple Watch. Tuttavia, alcune funzionalità avanzate, come lo sblocco remoto e la gestione a distanza, richiedono il collegamento con un hub Aqara. Inoltre, manca una funzione di auto-sblocco, che potrebbe essere aggiunta in futuri aggiornamenti. Qualità e Durata: La costruzione è robusta, e il design è pensato per durare. La batteria ricaricabile offre fino a sei mesi di autonomia grazie al protocollo Matter-over-Thread. Anche il tastierino è resistente alle intemperie, sebbene la serratura stessa non sia stata testata in condizioni climatiche estreme. In modalità "quiet", il meccanismo di chiusura è silenzioso, una funzione utile per non disturbare di notte. Pro e Contro: Pro: - Supporto per Apple HomeKey e Matter - Diversi metodi di sblocco (impronta, NFC, codice) - Installazione senza sostituire la serratura esistente - Modalità silenziosa e velocità di risposta eccellente Contro: - Richiede un hub per sblocco remoto e notifiche - Nessuna funzione di auto-sblocco al momento - Problemi occasionali di connessione con Apple Home durante l'installazione Rapporto Qualità-Prezzo: Con un prezzo di circa 270 €, l'Aqara U200 offre molte funzionalità avanzate rispetto a serrature intelligenti concorrenti, come la compatibilità con HomeKey. Il costo è giustificato per chi desidera un sistema smart e sicuro, ma potrebbe essere meno interessante per chi non ha un ecosistema Apple. Considerazioni Finali: L’Aqara Smart Lock U200 è un'ottima scelta per chi cerca una serratura intelligente con un’integrazione avanzata in ecosistemi smart home. Ha qualche limitazione, ma le prestazioni complessive sono buone, specialmente per gli utenti Apple.

Utilisateur depuis plus d'un an d'une serrure Nuki Pro 3eme et 4eme genération, j'ai fait l'acquisition de ce modèle afin de bénéficier de Apple Homekey avant tou et je suis extrêmement ravi! Tout d'abord les gros points forts: - Le prix! 199 en promo qui inclus le keypad lecteur de carte et d'empreintes alors que la Nuki est a 220 en promo mais il faut ajouter la Keypad hors de prix et qui n'a même pas de touche zero ce qui est parfaitement ridicule. - La plaque en métal qui s'installe sur la serrure alors qu'elle est en plastique sur le Nuki. La serrure est bien plus lourde que la Nuki. - La puissance du moteur qui semble bien plus costaud et qui ouvre plus rapidement la porte que la Nuki. - La possibilité de régler la vitesse de verouillage et donc de diminuer le bruit. Trois paramètres, normal, silencieux et mute, je préconise silencieux qui est le meilleur compromis vitesse bruit. Le mode mute peut être programmé pour se déclencher à une certaine plage horaire par exemple et ouvre la serrure très lentement et presque sans bruit. - Implémentation parfaite et simple de Apple Homekey (nécessite un hub thread Apple), possibilité d'ouvrir la porte très rapidement avec le télephone ou l'Apple Watch. Penser à activer le mode express sur Apple Wallet pour ouvrir la porte sans avoir à FaceID ou double cliquer sur l'Apple Watch. - Les nombreux adaptateurs inclus pour ceux qui ont des fermetures à bouton et des mousses de padding pour les personnes dont la serrure à juste une forme ronde afin que ca tienne bien en place. Sur la Nuki il n'y a rien de tout cela. - Le design sobre. - La stabilité de la connexion Thread Matter avec Homekit, là où ma Nuki se deconnectait du réseau très régulièrement. - La possibilité de se passer complètement de l'application Aqara pour l'installation (voir les restrictions ci-dessous) alors que pour la Nuki l'application reste obligatoire pour activer Matter, ajouter les Fob etc et la facilité de suppression du compte Aqara directement depuis l'app pour les maniaques de la confidentialité. - La calibration flash express qui se fait en un seul bouton et sans app, pertubant car on se dit c'est tout? - La fiabilité du Keypad qui fonctionne instantanément à tous les coups (vs les fob et keypad Nuki incroyablement capricieux et j'insiste, hors de prix) et qui offre en plus la possibilité d'etre cablé ou de fonctionner sur pile Les points faibles: - Nombreux bugs à l'installation!! Une fois les bugs contournés ca marche du tonnerre mais il faut comprendre que la serrure ne peut être installée soit en mode Aqara soit en mode Homekit! Et il me semble que c'est indiquée nul part. Pour ma part j'ai installé dans un premier temps en Homekit puis reset car je n'ai pas tous les paramétrages souhaités dans l'app qui demande de créer un compte pour y acceder, une fois la serrure paramétrée et mise à jour,j'ai supprime la serrure de l'app pour enfin la remettre en mode homekit. Vous allez vous arrachez les cheveux sur le bug du bluetooth qui ne communique pas sinon. - Pour les personnes qui ont une porte sans poignée extérieure, il faut donc dans un premier temps créer le compte Aqara, ajouter la serrure dans l'app, la mettre à jour avec le tout dernier firmware et activer la fonction de retractation du ressort pour qu'à chaque déverouillage sur Homekit la porte se déverouille à fond. Il s'agit pour le moment d'une limitation Apple qui n'a pas encore implémenté la derniere version de Matter et qui ne fait donc pas encore la différence entre déverouiller et ouvrir la porte car les serrure sans poignée n'existe pas aux USA. Les dernières versions de Matter avec implémentation de ce type de serrure sont bien prévu pour les prochaines mise à jour iOS 18, le problème n'est donc que temporaire. - L'impossibilité d'ajouter les empreintes digitales sans l'application ou alors c'est indiqué nul part comment faire mais je n'ai pas spécialement cherché. Ce qui n'a pas été testé : - La reconnaissance des empreintes digitales, car la possibilité d'ouvrir la porte avec le téléphone ou un code rend cette fonctionnalité bienvenue mais superflue. Pour résumer, un modèle très nettement supérieur au concurrent, qui n'a plus aucune raison d'être sauf si la personne a déjà investi considérablement dans l'ecosysteme Nuki.

Works really well. Installed over key, fixed firmly with grub screws and feels solid. Keypad with finger print recognition works reliably and quickly. Paired with Smart Things via matter and does all I need it to. For more tinkering in the Aqara app you need to be within Bluetooth range ie at home, but for the most part don't need to bother with Aqara app and can do all I need via Smart Things. Lots of functionality, some of which is limited if you have to lift the door handle before engaging the lock. Generally works quickly. Does make a bit of a grinding noise ie is loud but where I have it it doesn't disturb anyone.

Not bad. The adapters for the deadbolt tailpieces don’t work for some US deadbolts. The lock jams when you unlock from outside using the keypad. And to lock from inside with the knob you need to turn slightly right first to disengage the clutch.