ARES WINGSingle Monitor Mount with USB A/C, Heavy Duty Monitor Arm for 17 to 49 inch Ultrawide Screen, Holds 44 lbs, Adjustable Gas Spring Arm Desk Mount with Clamp and Grommet Base, White

Very sturdy, easy to assemble, and easy to adjust after mounting the monitor. I'd buy this again.

Love the look. The USB extensions are useful in most circumstances.Mounting mechanism is great - it does mean that to adjust, you have to remove the arm, but there's also almost nothing under the table. It holds very securely.I'm using this with a 32" Samsung IPS G50D. It's very light - too light for the head of the arm to tilt down on it's own.Loosening the bolt lets the spring tilt only so much - BUT tightening the bolt works. It makes the spring stronger making the monitor tilt up - but it also locks the head in place.

I recently purchased this ARES WING heavy duty monitor arm to support my 49-inch Odyssey monitor, and my overall experience has been very satisfactory.The stand is easy to install, the tilt angle is adjustable and flexible, and the support is very stable with no tilting or loosening issues. Although some have mentioned that the screws might damage the desk, I found that as long as it is properly installed, the desk remains undamaged.Overall, this monitor mount performs excellently and is definitely a worthwhile investment.

This was easy to assemble. Made really well. Once it was adjusted it is perfect for my 49 inch curved LG monitor. Great build quality, solid and maneuverable. I would have given this arm a 5 star rating but one of the cable management clips was missing. I didnt notice it until I was wiring the monitor. I reached out to Amazon but the only option they gave was to send the arm back for a replacement. Not a helpful option. I was hoping that they would be able to connect me with the manufacturer but, no. So I deal with cables hanging off the back of the arm. Not the end of the world. If you do get one of these, check to make sure you have all of the parts before putting it all together!

Great for the value, has a good grip

The quality of this mount is very high. I purchased two: one for a 24" monitor, which I used the rotating capability to use vertically for documents, and one for a 34 " widescreen monitor.Installation was easy. Follow the directions about mounting the monitor to the arm before setting the angles. The weight is necessary to get the tension correct. A second person would have been helpful, but I could mount both without anyone else.Tip: First, figure out how deep you want your monitor from the edge of the desk. This will help you figure out where to attach the mount to the desk. If the monitor is not fully extended forward, you will need to offset the mounting location from the center of the monitor. In my case, the lower arm was kept parallel to the rear of the desk, requiring me to offset the mount from the monitor center by about 7".Some useful approximate measurements:The distance from the back VESA to the upper arm joint is about 5". The upper arm is about 10" long (so less than 10" offset if articulated), and the lower arm is about 9" but at a fixed angle, yielding a 7" offset.

The media could not be loaded. I have tried for over 5 hours to install this and it just seems like a terrible product.Installing the base is easy but as soon as you get to the arms, it is impossible to set the correct tension or the correct monitor angle.I have a wide screen monitor and wanted something sleeker for my desk setup. I saw this and thought it would be perfect for the functionality I need and the ergonomic support that I need while working from home.Do not buy, it is not worth the trouble that you can see in my video.

Real nice arm. Love the color, the finish, it’s solid and really holds well.