Neoteck 0.03"/0.0005" Dial Test Indicator with 132lbs(60kg) Magnetic Base

From what I have experienced so far, this is an excellent indicator. I am able to get my units squared to the machine much faster than with my old one.

This kind of indicator and stand used to cost more back in the day. Of course if you want the best then you will still have to pay. But I was pleasantly surprised at the quality of this item. Of course you have to treat it with care as a precision instrument and I feel confident that it should last for years. I haven't done any accuracy testing but based on the overall quality and fluid movement of the needle I would expect this to be accurate.

I knew pretty much exactly what I would get with this kit. A respectable indicator and a garbage stand/arm. Indicator isn’t silky smooth, but it works and reads accurately against my DRO over a full rotation. The stand/arms is of course junk. Primary issue is simply that the rod arms (which provide pressure to lock) are very poorly machined. Sharp edges, burrs, generally wrong geometry which also led to spherical ball joints being gouged up. If you are so inclined and have the tools, you can disassemble everything, polish up the ball joints, polish and smooth the retaining rings, cut appropriately radiused reliefs in the push rods and appropriate wedge angles, wax it all up and reassemble. Now my arms are silky smooth and lock solid. A couple hours of time to get this more like a $150 indicator set.

Good tool

this indicator is very nice for using in the mill indicating vises and fixtures in with no problems at all the magnet holds it in place so you can see the proper location of the part or fixture i would recommend this indicator to friend

Not very solid. Dont really trust it

The indicator is JUNK. I have had it for one month and just tried to used it last night. New out of the box the needle was locked up. The bezel shifted side to side and as I fiddled with the bezel the needle freed up but would move at differant qualities depending on the position of the bezel.

No complaints, AMAZING product for the price!

I’ve bought 2 of these. Bought the second because I was impressed with the quality for the price I paid (sale price). I’ve not tested the accuracy of the dial but I only use them to align parts and for run out on the lathe. Mag base is plenty strong enough to hold the indicator in any position.

Good dial indicator for the price. Only complaint is that the knob for tightening the split sleeve did break. Fortunately it's a Philips head screw underneath and works fine. As far as I can tell it's movement is accurate. I use it to dial in tools on a CNC and .0001" does pick up on the dial.

Actually, a very good devise despite its low pricepoint.

Magnet base kinda weak but otherwise fine

I don't like this product at all. It does not articulate well, you cannot zero it, the guage is to small. May be okay for a jewellers lathe but not my mini lathe. Returned.