Bicycle wall mount perfect for heavy e-bikes

Very pleased with this wall mount bracket to store my mountain bike up on a wall out of the way, freeing up space in my workshop. Also not having to move it out of the way when wanting to access certain cupboards. It’s a well made product with clear instructions on how to fit the bracket(s) to the wall. Once in place, its straight forward to lift the bike into a secure position on the wall

Are great, easy to install. Note not all bikes will be balanced from front or back so the the 3 brackets are needed to guarantee position on wall.

Well happy with this Borden wall Mount . The Mount and the front wheel support are very sturdy and well made, and the screws (5) and wall plugs (5) are all good quality and perfect to complete the job. To fix the Mount takes 3 screws and plugs, and to fix the wheel support takes the other 2 screws and 2 plugs. I also used one of the black sticky backed pads (2) to hide any tire marks from the back wheel touching the wall. The 2nd sticky backed pad wasn’t needed now, but I’ll keep it just in case I need it later . Really happy with the bike Mount and the extra room I have now the bike is on the wall, as you can see from the photo it fits my wall perfectly. Ps, I originally put the Mount too low on my wall approximately 60 cms high from the floor but I changed it to 105 cms high from the floor as seen in the photo., so the bottom of the peddle is 105 cms from the floor as that worked well for my bike. I used the wall plugs as fixing into a wall, and used a size 5mm drill bit to pilot the hole and then used a size 8mm drill bit to get the correct size wall hole for the wall plugs. Well worth the money. Hope this helps you with your purchase.

This was a no brainer purchase. Cheap & shed loads of rave reviews! Took a while to fathom why you only get ONE (extra) support that's just for the front wheel, surely both would be better, but the manufacturer believes in their product and you only need the one... I have a XL Hybrid bike, with a sturdy bike stand. Popped this up in the utility room (average height ceiling), I upgraded the walling fixings and screws (mainly because I had them to hand, but also as I was sceptical over the supplied ones) & up she goes. I've put the extra front bracket on but the rear wheel doesn't touch the wall, the stand does & such if left will bend the fixing over time as the weight of the bike is distributed. So, this product isn't compatible with (double) bike stands. Mines a double stand, so I have had to use a large piece of sturdy polystyrene to compensate for the extra width I need to space. If you have a single stand, you need to fix the bike on the opposite side to the stand and you should be OK. Bit frustrating, as this should be a simple guideline set out by the manufacturer regarding it's compatibility with stands.

I was looking for an inexpensive yet robust way of hanging my e-bike onto the garage wall. My previous wall mount couldn’t take the extra weight of an e-bike. This is a simple and effective solution. It was quick to install with the instructions easy to follow - not that it needed much in the way of instructions. All the brackets are metal and very strong. The only warning is that the bike hanging at an angle when on the wall, rather than vertically. This is not an issue for me but worth being aware of. Great product, and an effective solution for hanging a heavier than normal bike.

Very sturdy and well made

Quality product. Great instructions. Easy install. Well made. Well packaged.

Very easy to install and use, extremely flexible (with just a bit of pre-measurement and experimentation, you can use this to hang your bike anywhere on a wall where there is space for it), and very minimalist (barely noticeable on a garage wall when the bike has been taken off it). Hanging bikes on a mount like this at a sensible height (so handlebars are just above head height) requires you to be able to lift the bike up to that height (so wheels are about level with your head) - provided you can do this, it can make a huge amount of difference to available space in a relative small room or garage.

The material is very solid, this is not going anywhere as long as it is secured properly. I was not too happy when I pulled the pedal bracket out, only to find there is not enough space for it to fit between the pedal and crank. I am not a fan of returning Amazon stuff as some say it is tossed away. So grabbed a grinder and shaved it down a little to allow sliding the pedal into place. Will smooth it out and touch the paint up. If they made the opening just 2-3mm wider it would solve this issue and not compromise the strength this has. I used both platforms, as it gives me some piece of mind. It gets a 5 but my review gives them a 4 due to the design issue, and the wish it had some more measurements online to verify. I do recommend this product however.

Wer ein Fahrrad besitzt, kennt das Problem: Wohin mit dem Rad, wenn es nicht benutzt wird? Die Borgen Fahrrad Wandhalterung bietet eine intelligente, platzsparende und stabile Lösung, um Fahrräder sicher an der Wand zu befestigen. Ich habe die Halterung ausführlich getestet und teile hier meine detaillierte Bewertung. 📦 Verpackung & Lieferumfang Die Fahrradhalterung kommt gut verpackt an. Alle notwendigen Befestigungsmaterialien sind im Lieferumfang enthalten: ✔ Halterung aus pulverbeschichtetem Stahl ✔ Hochwertige Schrauben & Dübel für sicheren Halt ✔ Wandschutzpad zum Schutz der Wand vor Reifenabrieb ✔ Anleitung mit klarer Schritt-für-Schritt-Erklärung 💡 Erster Eindruck: Solide Verarbeitung, durchdachtes Design und robuste Materialien. ⚙️ Montage & Installation – Schnell und einfach an der Wand befestigt 🔧 Einfache Wandmontage dank mitgelieferter Schrauben & Dübel 🛠 Montierbar in Garage, Keller oder Wohnung – vielseitig einsetzbar 🚲 Flexibel für fast alle Fahrradtypen geeignet (MTB, Rennrad, BMX, E-Bike) ✔ Bohrlöcher markieren, bohren, Schrauben festziehen – fertig! ✔ Für sicheren Halt muss die Wand tragfähig sein (z. B. Beton, Mauerwerk) ✔ Aufpassen bei Rigips- oder Leichtbauwänden – zusätzliche Verstärkung notwendig 💡 Montagezeit: Ca. 10 Minuten, einfach und problemlos! 🏋️ Belastbarkeit & Stabilität – Hält die Halterung, was sie verspricht? ✅ Tragkraft von bis zu 30 kg – ideal für E-Bikes & schwere Mountainbikes ✅ Pulverbeschichteter Stahl sorgt für lange Haltbarkeit & Rostschutz ✅ Softschutz an der Halterung verhindert Kratzer am Pedal ✅ Zusätzlicher Wandschutz schützt die Wand vor Schmutz & Kratzern 💡 Fazit: Die Halterung hält sicher und stabil, selbst bei schweren E-Bikes! 🚴 Funktionalität & Alltagstauglichkeit ✔ Platzsparende Wandaufbewahrung – Fahrrad hängt sicher & nimmt wenig Platz ein ✔ Schnelles Einhängen & Herausnehmen – perfekt für den täglichen Gebrauch ✔ Hält das Fahrrad waagerecht & sicher an der Wand ✔ Passt für fast alle Fahrradtypen & Pedale (außer XLC & Crankbrothers Stamp) 💡 Top für kleine Räume, Garagen oder Keller – endlich kein Chaos mehr! 🏆 PRO & CONTRA – Mein Fazit nach mehrwöchiger Nutzung ✅ Vorteile: ✔ Sehr robuste Verarbeitung & hohe Belastbarkeit (bis 30 kg) ✔ Einfache & schnelle Montage mit gutem Befestigungsmaterial ✔ Schutz für Wand & Fahrrad (Softschutz & Wandschutzpad) ✔ Platzsparende & stilvolle Lösung für die Fahrradaufbewahrung ✔ Funktioniert für MTB, Rennräder, E-Bikes & mehr ❌ Nachteile: ❌ Nicht ideal für sehr breite Pedale (z. B. XLC, Crankbrothers Stamp) ❌ Nicht für Rigips-Wände ohne Verstärkung geeignet 💰 Preis-Leistungs-Verhältnis – Lohnt sich der Kauf? Mit einem Preis von ca. 20–40 € (je nach Set-Größe) bietet die Borgen Fahrrad Wandhalterung ein hervorragendes Preis-Leistungs-Verhältnis. Die Kombination aus Stabilität, Schutz & einfacher Handhabung macht sie zu einer perfekten Lösung für Fahrradliebhaber. 🌟 Gesamtbewertung: ⭐⭐⭐⭐⭐ (4,8/5) 🎁 Tipp: Entdecken Sie außergewöhnliche Bildkalender, Puzzles & Leinwände – die perfekte Geschenkidee! 🖼️🧩 Erhältlich auf Amazon – einfach nach "Marco Warstat" suchen. 📆

Utilizzo questo supporto per appendere sia la mia MTB da 29 pollici sia la bici da corsa. Lo impiego con bici che non superano i 10 kg, ma con tasselli di buona qualità penso possa reggere senza problemi anche e-bike oltre i 15 kg: il materiale infatti è molto robusto. In dotazione sono presenti la staffa per il pedale (compatibile con tutti i tipi di pedali) e due staffe per le ruote. Se si vuole evitare di fare troppi fori a muro, è possibile utilizzare solo la staffa per la ruota anteriore. I tasselli sono inclusi nella confezione. La staffa per il pedale è inoltre dotata di una protezione in gomma per evitare graffi. Nel complesso è un prodotto eccellente per appendere le proprie bici alla parete; apprezzo anche l’aspetto estetico, perché sembrano quasi esposte in vetrina. Consigliatissimo!

Co powinieneś wiedzieć? ​ ​Gdy Twój rower, wielki kloc, Zagradza w sieni przejście w noc, Wtedy Borgen wkracza w drzwi, I na ścianie rower wisi! ​Trzydzieści kilo - żaden strach, Na nim mieści się rower-dach! Więc kup Borgen, by od dziś, W sieni żaden gruz nie leżał już!

Muy buen producto ya que la bici la puedes tener a una altura que no te estorbe, siendo ideal si no dispones de mucho espacio en la estancia donde la guardes. Fácil montaje y soporte muy bien el peso de la bici, pues yo la uso para mí MTB, lo cual para una bici de carretera mucho mejor al ser más ligera. Altamente recomendable