3D Printer Filament 1.75mm, 3D Printing Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 KG Spool (2.2lbs), PLA F Army Green

Super great filament, I had only one problem with one roll that needed drying and one roll that I didn't catch it in time. This is PLA - F so it has ABS in it so be sure to follow the instructions for PLA F and do calibration on your printer specifically for this filament. This will probably be my all time favorite type of Filament to print in, more then PLA or PTEG. its flexible more so then PLA or PTEG, it is also not as brittle. I haven't done any specific testing on this but I can tell there is a difference. I hope somebody does a review deep dive on this. Color looks good on this deep black, looks kind of glossy Worked really good, clogged once out of 10 rolls, but I was able to resolve that really quick. While not pure ABS I strongly recommend having some kind of ventilation or airflow with Charcoal/HIPPA filter combo.

I have multiple different colors of this filament, and it has quickly become one of my favorite brands...but it seems that it's not really available anymore, which is sad. I hope it comes back. It is consistent in color from one order to the next, prints flawlessly, and is such a nice texture.

This was easy to use and i got the right temp on the first try which is what I was worried about. I used 225 degrees and it printed beautifully. I was worried at first about the quality as it was such a great deal, but I am pleasantly surprised about the quality and the performance. The color stayed vibrate and looks so good on my sunflower dragon. The adhesion was great especially since I have been have trouble prior to this. I used 62degrees for my bed temperature. It seems durable so far and as I cleaned up my Items I didn’t break my model. Would recommend this. Great price and great product.

This was the most affordable glow in the dark filament I could find on Amazon. The quality was good. I didn't have any issues printing with my A1 mini. I like that it came with a resusable spool but be aware you WILL need to print an adapter (found on MakerWorld) if you want to use the AMS lite. The only negative I could think of was that it's not very glow in the dark. Granted I only printed the "spit" with this and it's just a *tiny* part of the model. So maybe it's just not enough to really make it noticeable. It does glow in the dark though. I'll have to print something bigger in just this to see how much it actually glows. Also, be aware this is PLA-F, mix of PLA and ABS. Overall, a good value, comes with a reusable spool, does what it says and prints fine. I'd buy again and in fact I did. I purchased a few more colors after receiving my initial glow in the dark order.

Good stuff. I consider this a niche PLA, almost in the same vein as Overtures Turbo PLA which is also a mix of PLA and other materials. The result being the adhesion is high! It is not as problematically high as the other brand but it is on the same level as PETG. It's also less brittle. Printing it on a clean textured PEI it was still removable but I did get some damage to the models themselves where it stuck too hard. Trying it with some hairspray as a release agent and this Likesilk filament came off perfectly. That above average adhesion makes this an excellent filament for those leaning prints and for speed printing because nothing is going to shake loose. Sport mode on my P1S was flawless and so far tests with Ludicrous are looking good too. Just be aware that due to this not being a pure PLA I wouldn't be surprised if it does NOT mix well with other pure PLA brands in the same print. That's usually the case. If you are sticking to Likesilk's line of filament colors it doesn't matter though.

There are soooo many reasons to not like this filament, the company outright lied about almost every point to this filament... I have tried 250c hotend, 70c bed, turning the speeds down to 30mm/s while cranking up the temps ect... This filament just will NOT print correctly under any circumstances, It's priced this low for a good reason. Waaaaay too much ABS in the mix it is not just 20% like stated and it really shows in the product. The smell is terrible, might as well be printing in straight ABS imo it is enough that you will get a headache in minutes if you stay in a room with 2 or 3 of these rolls printing at a time and I keep an exhaust fan running 24/7 The warping is absolutely unacceptable too, this roll warps worse then actual pure ABS... I have no idea why but if you try to print large flat objects just give up, I have printed ABS at lower temps and had better success, this polymer blend is NOT okay. I printed it on a P1S completely enclosed with temps jacked to 70 on the board and it will not bond at all, every large print as been a complete failure even with 15mm brims attached and half speed on first layer the roll itself has TWO different recommended printing ranges on it, and BOTH of them are completely wrong, do not use this for multi material prints either there's so much ABS in the roll that it refuses to bond with most of the other pure PLA rolls I have Save yourself the time and avoid this brand at all costs, they are completely dishonest with this advertising and I'm confidant this "pla-f" won't be around in the next 3-6 months, it's something I don't think they intended to make this way.

This is some of the best filament I've used. Understand that PLA F has ABS so there will be more VOCs and a different smell than PLA, but not nearly as bad as pure ABS filaments. You get the ease of printing PLA with the best of PLA and ABS appearances. Great adhesion and no warping or layer shrink. Post processing is a much easier than other PLA filaments; sanding it is closer to sanding ABS, but you can't vapor smooth it, the acetone will only soften the ABS and it doesn't work the same.

A+ Filament. This Filament is very forgiving about temperatures. Sticks great yo the build plate and feels like ABS material. It's smooth and makes constant layers. Will for sure buy again.

Prints great, excellent finish. Yes this has some ABS in it and it will smell slightly different than PLA which doesn't smell at all, but it's really not as bad as some reviews make it to be. The only issue I've had with this filament is that it sticks really well to the plate, sometimes a bit too much for prints with a large first layer surface, but simply heat the bed to 50C and it makes it easy to remove. If you have white marks at the bottom of your print just pass a flame from a lighter and they disappear right away. It's something I don't have to do with other PLA filaments but for the $5 price difference it's not an issue at all

Likesilk 3D Printer Filament PLA F 1KG 1.75mm 3D Printing Filament is what I read. Should have read details better. I received a 0.25KG roll of filament. Lesson learned.

bonitos colores ademas llego rapido

I had no issues with a freshly opened reel. My prints came out great. It didn't break as I fed it.