VEVOR Screen Printing Machine, 4 Color 4 Station 360° Rotable Silk Screen Printing Press, 21.2x17.7in / 54x45cm Screen Printing Press, Double-Layer Positioning Pallet for T-Shirt DIY Printing

For a manual I love it. Here’s some Tips and tricks: Once you build it you’ll know all you need to know about it. You’ll know when its not working and why. - I haven't stuck mine down to the table because I need to be able to move it into storage from time to time. This can at times be shown in the weight and pressure put on the prints. I’ve simply put a masking tape roll under the black pole that that board is fixed to. - If your print are coming out thick on one side and thin on the other its not you and your lack of balanced pressure. It’s because the board isn’t flat straight. Use your phones measure true and balance your phone on the board to check its straight. - screw everything tight except the springs that needs to be able to go up and down freely but not too freely that it drops on you. - for kids shirts cut one of the boards and smooth out the corners so you don't cut shirts or worse yourself. - Again for balance put a roll of masking tape under your board beneath the black pole so when you print it doesn’t bounce and your pressure isnt in vain. - if you don’t have a heat flash machine use a domestic heat press. Unscrew the top of it using one of the tools from this machine so that it hovers just above your shirts. - CHECK THE SCREENS YOU ARE BUYING. The sizing, the mesh type it will all tell you if it will cover your shirts and if it will work with your ink. - test everything before you do the real thing on the shirts, practice the prints. - you don’t always have to use emulsion you can also use premium vinyl social media will show you.

Very useful. Innovative!

Aunque todavía no la he usado, da la impresión de que nos será de gran utilidad. Un 10 para el vendedor por su atención al cliente.

Ecelente maquina

As ferramentas (de plástico) vinham esmagadas e partidas, Algumas peças do 'puzzle' vinham tortas e empenadas. No caso das ferramentas de apoio, não houve problema, pois usei as minhas próprias ferramentas. No caso das peças tortas ou empenadas, uma vez que são de metal, eu próprio endireitei e consegui montar tudo e tudo ficou funcional. As instruções de montagem não são muito claras, montei quase tudo tendo como base a 'adivinha'. Mas ficou tudo bem!

Product was everything described, but it apparently had been return and not inspected before I received it. It has scratches and paint on it from use. Screws and hardware were not labeled correctly, making install a little challenging