PLA 3D Printer Filament, 3D Printer PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 4 Rolls of 1KG Spool PLA Black

Great budget filament and works great in my K1Cs and my K2plus. Does not play well with the CFS on the K2plus. The reel is not perfectly even on most of these and it has some issues during filament retract. I plan on spooling it to a plastic reel with a rewinder. They work great on the K1C and my other Enders. And the K2 when on a plastic rell with the CFS. A little time to respool not too long.

Prints great and spooled nice and cleanly. Quality product comes packed neatly and free of moisture, making it easy to use. Will definitely buy more of this brand. Great value overall and liking it a lot! Gray and white in photo are from this pack.

Over the years, I’ve used plenty of brands, and plenty of materials. Comgrow PLA has been a game changer in terms of quality, and ease of use. For example, I recently tried SUNLU and had so many issues. Clogged hot end, adhesion issues (with both stock and glass bed), so many clogged nozzles, etc. Comgrow has been so easy to use, and the quality is on-par, if not better, than any other brand I’ve used. It sticks to the bed, glass or stock, like glue. Funny enough, I don’t even need bed adhesives to get it to stick, it’s that good. I feel comfortable printing multiple parts at once using Comgrow with how consistent it is. Settings: Stock Cura settings! (Ender 3) 200° Nozzle, 50° bed. And it works perfectly. .2 layer height, and .16 work the best. Anything above that is hit or miss, but I blame the printer for that. Overall, I HIGHLY recommend comgrows PLA.

It’s stable PLA and is pretty good at lower and higher speeds. Works best at its glass levels. It should stay at 200C or below, anything higher it’s strings and zits. Best temp I have found 200 at a speed 45mm/s and a retraction of 45mm/s with a hotbed of 60 or 70 depending on ambient temp or if you have a cover. Or 190 at 30 mm/s This is using an Ender 3 S1 Pro with direct drive, with 300+ hot end and Klipper Firmware. At higher speeds keep it at 200 and it works well at 60mm/s. I tried it on a buddy’s Neptune 3 pro and it differs greatly. Hotend needs to be at 210 no hot bed if you have one and a speed of 60mm/s with a retraction of 45-50mm/s. On my brother in laws Bambu keep it at the suggested levels on the PLA works best. It’s a nice bright color and even works well with minis and larger projects as well. Cons - it strings easily and is prone to elephants foot at higher then suggest temps. Details are hit and miss. Pros - Adheres to the plate like a rockstar, cleans up easily if you need to sand it, and doesn’t require a lot of filament, which means great on the pocketbook. Suggestion: If you do minis, do them with a .2 do not use standard .4 nozzle.

I have a Bambu Lab A1 with the AMS Mini which I absolutely love using. The Bambu filament is expensive compared to other filaments. But their spools have RFID so that you can just load the spool and the AMS automatically recognizes what's on it. It's super convenient when changing out spools. Rather than getting Bambu refills, I wanted a cheaper option, hence coming to the Comgrow filament. I printed a respooler and I just transfer the Comgrow filament to the Bambu spool and now the AMS Mini recognizes what's on it. I find the the Comgrow filament works wonderfully for various projects with the generic presets for PLA, at half the cost of other brands. The PLA filament prints great. This particular color was just what I was looking for.

Needed some cheap orange filament for some keychains so decided to try out this brand, not disappointed! Not a single tangle or failure, prints amazing!

Great color choice for Eagles green. I did so much back and fourth with choosing the correct color for the team. I think out of the others this one is the closest I could find. After drying the filament the prints came out flawless. The spool and dimensions of filament seem perfect. Easily would buy this again when I run out.

I’m very disappointed with this PLA filament. It constantly gets stuck in my Bambu AMS 2 pro and cannot load properly. I tried multiple times, but the same issue keeps happening. I left my printer running overnight, and it failed several times due to filament loading errors. I had to wake up in the middle of the night just to fix it. I’ve used other PLA brands without this problem, so I’m confident this is a filament quality issue. Would not recommend this.

En una Anycubic se pudo imprimir sin problemas siguiendo las especificaciones del vendedor

I had problems with this material. I used only the black one and clogged my 2 machines (Ender 3 s1 pro and my older ender 3). One of the machines has not been working since then. I changed the nozzle, however, it is still not working. It was a brand new hotend kit :(

Llego en perfecto estado, pero el producto llego abierto, la etiqueta de sellado había sido retirada, pero supongo que fue por el el proceso de aduanas ya que fue un producto de importación, de todas formas al revisar el producto que es lo importante parece ser que todo está en orden y que los filamentos aún conservan su empaque al vacío, más adelante actualizare sobre el desempeño de los filamentos ya que no he tenido tiempo de probarlo

No me gusto que el material viniera como si lo hubiesen desenredado y vuelto a enrollar, a simple vista parece que se atorara en cualquier momento pero estoy imprimiendo sin problemas. Me gusto que la bolsa en que venia estuviera cerrada al vacio y en una caja de carton.

Se derrite a una temperatura menor, de lo contrario deja demasiados hilos.