Stainless Steel Table for Prep & Work, 24 x 30in

First - my workbench reflected none of the problems experienced by some earlier reviewers. All the pieces came in flawless condition even though the box was a bit beat up in handling and one of the two straps came off just as it reached my door. I was impressed that Fedmax used metal corner protectors to shield the wood top for shipping. The whole thing was together in a few minutes and the screw holes lined up just fine. To ease assembly I left all the fasteners slightly loose until everything was assembled, then I went around and tightened everything. This is a standard assembly trick that I highly recommend. I chose to use the castors and was impressed that the locking casters are double locking; locked against both rotation and swivel. The castors were hard to screw in so that they fully seated in their holes. Using a pair of grip gloves to seat them did the trick. The castors are small but do the job of moving or securing the bench very well. The wood top is impressive. The wood is simply beautiful - a fine furniture grade piece of material. At 1" thick it is sturdy enough for all practical purposes. This is a nice sized bench at 20 inches x 48 inches; a good balance between compactness and a really useful sized work area. The bench is so nice I'm thinking of buying another to use as my desk.

I purchased this to use as a workbench in my garage. The quality was far better than what I expected. The legs and frame are made of heavy gauge steel, with an attractive a durable looking gray coating. The bolts used to assemble it with are heavy duty, and the hardwood acacia top is quite beautiful--so much so, that it's going to be hard using it as a workbench (my only "complaint"). I'll definitely cover it with cardboard when I use it for that purpose, to protect the wood. It truly does look attractive enough to use as a piece of inside furniture, such as a desk or worktable. I found it easy and fairly quick to assemble (an electric screwdriver with a hex bit will speed up the process), and the instructions, though short and simple, were perfectly clear and adequate because assembly is so easy. There were a number of quality, attention to detail touches, too. Where the bolts screw into the underside of the wood top to attach it to the frame, there are threaded metal sockets embedded in the wood, so there's no danger of stripping, which there would be in they screwed directly into the wood. And the small wrench which is included to facilitate assembly is another nice touch: with most furniture, etc., where a wrench is included, it's a simple, cheap piece of stamped metal, but the one that comes with this bench is a real tool: a forged, double-end wrench, one side of which fits the nuts on the bolts, and the other which fits the optional casters to screw them into the legs.

Love

Table looks great but be mindful of actual specifications and a few safety points I will share. Pros: - Beautiful wood top - Nice looking legs, heavy and seem strong - Adjustable height - Assembly was mostly a breeze with exception to some cross-threaded bolts, as received Cons: - Max weight limit is 300 lbs, NOT 1750 lbs (is reason for my 1 star review) - Arrived very dirty with metal dust which you should take steps not to get on skin or in-hail - Provided tools were not adequate for proper assembly - Lacking QA in several areas (cross-threaded bolts, messed-up threads in nut, etc.) Safety: - Table is heavy so be careful with potential tip-over on the narrow sides - Don't breathe the metal dust, probably not good for the lungs (carefully wipe-down with damp cloth as not to cause dust to go airborne) - Wear gloves to protect from metal dust getting on hands (carefully wipe-down with damp cloth as not to cause dust to go airborne) - The 4 protective metal protective-corners that must be removed as part of assembly may have very sharp edges or protrusions. Great product, better that most I have tried but Ad should be fixed to represent honest specifications or not cause incorrect assumption of specs. Hope this helps!

This table is a great value for its size and configuration. I use it in my shop to work on dirty/oily/wet items with easy clean up. The table seems pretty sturdy and should hold up well for my use. I like the small "backsplash" that keeps parts and fluids from going off the back of the table. I really like the lower shelf to store parts while using the main work surface. The table was easy to assemble. The table metal came with a protective plastic coating. The coating was tedious to fully remove. The table had two very minor dents/cosmetic flaws, but at this price I was OK with that for my use.

I bought this purposely for the reason it is 20 inches wide. I am building a mobile miter saw station and this will serve as a great base. I needed an adjustable height mobile base that was open in the middle because I have a dumb dry well pump in my garage for the sprinklers. This bad boy cradles it so I can use the space around it in my small one car garage. One thing to note though, the wheels are super cheep and small. I upgraded to 2" post casters with dual breaks, you can find plenty of them here on Amazon". Just note the thread size when you order your new castors. The table was a bit unstable with the little wheels that come with it but since I am a tinkerer, that was not issue. Popped those new ones on and good to go. Cost me 20 bucks for the new set of awesome wheels. The top is surprisingly beautiful. Almost hate screwing into it...almost. Anyway this is a great buy. The base is rock solid and the top is solid wood. There is also a support bracket in the back that does not show in the photos because it is right under the top. Gives plenty of lateral strength. Don't forget though that the screws to the top come screwed into the top from the factory so you are not missing them. Just unscrew them from their grommets that are preset into the top and attach your frame. Took me only about 20 min to put it together. Easy day.

When the package arrived from Amazon, it had tears in the box, and the corners on two edges were bent. This is not a manufacturing issue but a delivery issue. As for the table, I love it. 5 stars. Zero stars delivery. So a 3. It was easy to put together, did it quickly and by myself. The only challenge with 1 person is getting the base level. Found a solution quickly, though. I used 2 same-size protein containers and placed them under the base, then did the same thing on the other side. But way easier if 2 people!

Perfect size, sturdy even though it’s cheap.