Meguiar's G17804 Keep Clear Headlight Coating, 4 oz. - Maintain the Clarity of Your Headlights

Meguiar's G17804 Keep Clear Headlight Coating, 4 oz. - Maintain the Clarity of Your Headlights

Q: will this work with new headlights?

Scott Kilmer did a test on new headlights and he recommends using it on new headlights. I suggest you look for yourself on YouTube.

Q: What is the best way to remove the old coating of this spray coating? The coating is peeling off about 8 months after I applied. I want to re-coat.

Rather than grinding everything down again with a typical sanding restoration kit, you are much better off using Mother's 0510 Mag and Aluminum Polish (available on Amazon). Apply it to the headlights using a buffing sponge (either by hand or power). This will remove the old coating without taking more of the plastic off. When I've done this using an attachment (Thikpo 12 piece 3 inch buffing pads available on Amazon) to my drill, it literally took less than 5 minutes per headlight.

Q: Does this product need to be removed from the headlight assembly before reapplying within a year?

I reapplied after 14 months, the headlights had a lot of dried Lovebug juice, it is hard as a rock, so I had to clean it. Tried a few bug & tar stains removers and they didn't do anything. Then tried Solimo 99% Isopropyl alcohol sold by Amazon and it took it off. I also notice the original coat of the Meguiars Headlight Coating had hazed a tad, which was not apparent till I fully finished the first lens and compared it to the other side which I had not done yet. The alcohol will haze the lens, but that it just because it dilutes the old headlight coating as it takes it off. You need to use a paper towel cut in 4 pieces and wet it and use one side to clean, then turn it over and use the other side and keep doing it till you are sure all the headlight coating and Lovebug juice is off. Then polish the remaining haze with a dry paper towel. At least that is what I di and it worked great and was easy work.

Q: Is there an alternative to coating like this? I see plastic polishes with wax? Probably need regular application

Wax based coatings make pretty, but don't last. Can also absorb bug goo & other contaminants. This is hard, non-porous coating that is surprisingly durable. CLEAN EVERYTHING FIRST!

4.4/5

Product ID: 728183869

Secure Transaction

Details

Brand
Meguiar's
Color
Keep Clear
Specific Uses For Product
Head Lights
Vehicle Service Type
All
Year
2016
Wattage
55 W

🔒Long-lasting clarity lock

🕒Extended headlight lifespan

☀️Durable UV protection

Frequently Bought Together

Meguiar's Keep Clear Headlight Coating, Maintain Like-New Clarity of Your Headlights with an Easy-to-Use Formula and UV Protection that Lasts All Year Long, 4 Ounce Aerosol

Meguiar's G12310EU PlastX Plastic Polish, 296 ml

3M Headlight Lens Restoration System, 39008, 1 Kit

Description

✨ Keep your headlights flawless and your ride unforgettable!

TRUSTED BY PROS - BMW-approved quality ensuring premium protection and durability.
RESTORE PROTECT - Maintains the clarity of restored headlights for a fresh, like-new look.
SHIELD YOUR SHINE - Advanced UV blockers keep headlights crystal clear and prevent yellowing.
LIGHT UP YOUR DRIVE - Enhances visibility and safety by preserving headlight brightness over time.
EFFORTLESS APPLICATION - Smooth exterior finish with easy 4 oz. bottle for quick, professional results.

Meguiar's G17804 Keep Clear Headlight Coating is a 4 oz. premium formula designed to provide durable UV protection, maintain restored headlight clarity, and extend the lifespan of your vehicle’s headlights with a smooth, easy-to-apply finish trusted by BMW.

Specifications

Manufacturer	bmw
Brand	Meguiar's
Model	G17804
Product Dimensions	19.69 x 4.72 x 4.72 cm; 175.99 g
Item model number	G17804
Is Discontinued By Manufacturer	No
Exterior	Smooth
OEM Part Number	G17804
Position	Right
Item Dimensions L x W x H	19.7 x 4.7 x 4.7 cm
Wattage	55 W
Color	Keep Clear
Year	2016
Item Weight	176 g

Have a Question? See What Others Asked

will this work with new headlights?

What is the best way to remove the old coating of this spray coating? The coating is peeling off about 8 months after I applied. I want to re-coat.

Does this product need to be removed from the headlight assembly before reapplying within a year?

Is there an alternative to coating like this? I see plastic polishes with wax? Probably need regular application

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Pooja R.

The customer service exceeded my expectations. Perfect for buying products you can't find elsewhere.

1 week ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App