OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle / Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding , Multi color(Packaging May Vary)

The bottle is a little small but in my Wrangler I could push the pedal 8-10 times before it was full. It took maybe two bottles to get clean fluid to the rear an then the other three calipers were flushed within one bottle. Easy peasey. I was a little skeptical of the fitting to push into the bleeder screw but I had no leaks on any of the 4 wheels while I was pumping. It has fittings to bleed a master cylinder too which is nice.

I used this to replace and bleed the brake fluid on my motorcycle. It worked great for that purpose. I stuck the magnet to the brake rotor. The bottle is small. For a motorcycle with relatively short brake lines, there isn't a lot of fluid to bleed out to remove the air so the small bottle is fine. If pushing a lot of fluid out for a car was needed, this small bottle would get annoying real fast.

This is a good little bleeder kit for what you pay for it, but knowing what I know now, I probably would have chosen something different. First off.. the magnet always pops out of the holder so your bottle falls off. A dab of super glue will fix that little issue but I shouldn't have to. The hoses are just a tad too short, especially if you're doing brakes on a truck or big SUV making it a little awkward especially when you are fighting with the magnet issue. Lastly, the bottle is too small. It only holds a couple ounces at most. I usually have to dump it half way through the bleed. So.. I mean it works, and I'll keep using it because I'm not doing brakes every day so it's not a huge inconvenience for me, but had I known these things I probably would have opted for a kit that at least had a bigger bottle with it.

This kit is not well represented in pictures/description. It works OK - in that it performs the function it's intended to but I was disappointed in a couple different ways. The bottle is tiny. Depending on what exactly you're doing this might prove troublesome. I was bleeding the caliper at each wheel before removing and changing pads. Basically I wanted to get the majority of the old brake fluid out of each caliper before forcing the fluid back into the system (because the fluid at the caliper is where the fluid breaks down over time the worst. The small size of the bottle means I would get about 4 pumps of the brake pedal before I needed to empty the bottle. It didn't kill me, but it definitely added time to the whole project since I was flushing the majority of the fluid out. The magnet is worthless. It's a very thin, very weak magnet and it has almost no grip. I still used it, but instead of risking the magnet, I wedged the little silver disc in between the fender liner to hold the bottle. The different fittings and tubing are a nice touch, but most are too small to do anything. I heated up the tubing just a bit to make it more pliable and forced it over my bleed screw fitting. Just barely fit, but at least it was tight. without heating and stretching it a bit, the tubing is very rigid and tends to slip off the plastic fittings. Overall, it really is a neat little tool and it does indeed make it possible for one person to bleed the brakes, albeit quite inefficiently. I might glue on a new magnet, super glue some of the tubing onto fittings and add it to my motorcycle toolbox. But for larger applications, a friend's assistance or a pickle jar copy might be better suited.

This is amazing!! Just follow exct directions, othewise it does not work. Amazing and so simple. I gave to a friend and he said if I ever knew about this before.

I bought this to change the brake fluid on my Suzuki SV1000 motorcycle. I began by connecting the tube to the bottle. I then realized the bottle was too small and there wouldn't be an easy way to empty it. I tried to remove the tube and the plastic bottle nozzle tore off. I ended up cutting the tube off the nozzle. I attached the pointy plastic nozzle to the other end of the tube. I tried to hook it up to the bleed valve but the nozzle keeps coming loose. It kept leaking fluid everywhere. I finally got it changed by I got a lot of air in my rear brake line and I will have to go back and flush out the air bubbles. It took me a long time and a lot of paper towels and was a huge pain in the butt because the longest tube is hardly long enough. If I had it over again, I would go to Home Depot and buy a plastic tube that fits tightly over the bleed valve then just use a razor to slice it off when I was done. Basically, the plastic nozzles suck. The bottle sucks. The tubes can be used but are too short (and therefore suck). Bottom line: go another route.

Just tackled my brakes this weekend, and I have to say, finding a good brake bleeder kit when you're flying solo is a game-changer. It's a straightforward setup: hook up the small container and tube right above the caliper, pop it onto your bleeder screw, give the screw a little loosen, and then it's just a few slow pumps on the brake to clear out any air lurking in the lines. What really seals the deal is the kit comes fully loaded with everything you need. There's even a magnet to keep the small container in place, which is super handy when you're juggling tools and focusing on the job. Literally, all you need is to press the brake with your foot and keep your brake fluid topped up. For anyone who's had to bleed brakes the old-fashioned way, with a buddy yelling back and forth from the driver's seat to the wheel, this kit is a breath of fresh air. It's easy, mess-free, and you don't have to coordinate with anyone. Just you, your car, and a bit of DIY spirit.

best product on the market

Great product but I wish if the bottle was bigger. Loved the little magnet which is really handy.

صغيره جدا تم شرائها ب 12 ريال في عرض ولكن السعر الطبيعي 80 ريال مبالغ فيه اقصي مبالغه ماتستاهل اكثر من 12 ريال

Exactly as advertised Good bleed kit

Su imán que trae como base es de pésima calidad.

Never used yet, but looks like it could do the job with ease.