NOVSIGHT H11 Bulbs 48000LM 600% Brightness H8/H9 1:1 Mini Size Fog Light Bulb Set 6500K Cool White, Pack of 2

Highly Recommend this seller Very High Quality Led's and the Brightest Led;s I have seen online. Have had a set since 2014 and are still functioning excellent. Have not had one malfunction yet and have not found led's brighter than the NOVSIGHT Brand

These are very brite, the H-11 work very well in the projector housings in a 2016 Honda Accord Ex-l No dark or hot spots ( clean ). I only have about an hour on them so can't say anything about how long thell last.

I never thought changing a headlight assy and upgrading to LED lights could be such a challenge. The Novsight LED's made it almost easy if the instructions were clearer. The Leds dont align to the proper position, the instructions say to pull it apart but they don't say that a torx screw needs to be removed to properly install and align the LED tower. And its a small torx. Luck had it that I had a mini set in my tool box. After removing the screw I inserted the base, it only goes one way. Then take the led tower holding it vertically with the High beam on top. The high beam is the leds that extend out from the base the farest or closest to the end of the tower. Push the tower into the base keeping the tower with the leds at the 3 and 9 o clock position. Once its inserted all the way, remove the ENTIRE ASSEMBLY as a unit. Look for the hole where you pulled the screw out and put it back in to the closest hole. Insert the assembly back in and verify the tower flats are at 3 and 9 where the leds are mounted "The yellow squares" If they are correct you are done, if not try again. This led assembly let me align it perfectly, other bulbs won't spin. This instruction is for a H13.

So far so good. They are a lot brighter than my older low beam tungsten bulbs.

I put 5 stars so you can see this review quickly. If you have a Wrangler avoid buying these lights because they have an external ballast that won’t fit inside the headlight assembly. I didn’t like that the external ballast wasn’t included in the description because I wouldn’t have bought it. You would need to buy an extended dust cover for these to fit, but those don’t seal out water correctly so I chose to return it. I’m sure they work good but I was disappointed that they didn’t fit. I had no issue with the return process, and I’m sorry I didn’t post a picture of the product before I returned it.

They are very bright, replaced the standard bulbs on a 2019 jeep renegade with 0 issues

Super bright. Would recommend to anyone.

Muy buena calidad