ECHOGEAR Advanced Tilt Wall Mount for TVs Up to 86" - Maximum Tilt Range On Large TVs - Great for Mounting TV Above A Fireplace - Easy Install & Hardware Included

I really WANTED our 82" TV mounted over the fireplace. But I hated the thought of doing it. Several aspects of the project were, for me, "challenging". The builders who built out our lower level did not own a square or a level and would not have known what to do with either. The brick replaced architectural stone in the fireplace. So we scoped behind the brick and could not find any supporting structure (wall, studs, ties to the main fireplace, etc). So we decided to build a "wall" supported by the mantle and anchored to the ceiling studs with lag bolts. The specs for the TV show it weighs 98.5 lbs. To be sure about the support, we added two 2 x 10s (photo) in the wall where the bracket would mount. We used the supplied lag bolts to mount it to the finished wall. Bolting the mount to the wall was as easy as drilling the 7/32nd holes into the supporting 2 x 10s leveling it and bolting it up. It was no surprise it was 1/16th" off level drilling holes like that into material like that. Mounting the brackets onto the back of the TV was almost as easy - and hence only 4 stars. The supplied bolts were a tad long. A washer on each bolt took up the slack nicely. The TV is Samsung 82" Class NU8000 Premium Smart 4K UHD TV. I either overlooked it or it never occurred to us to level the mounts on the back of the TV before we hoisted it up onto the wall. More later on this. The ledge where the two brackets engaged was above eye level with a brick hearth to make the job of hoisting it onto the wall a little harder. We used two men to lift and one, on a ladder in the center, to help as well as ensure the TV did not tilt too far in any direction. It went right onto the wall bracket. AND, once it was up there, sliding it a tad left or right to center it was very easy. Surprising for what I thought was a pretty large TV that was a little heavy. When we put a level on it we were pretty disappointed. We expected from mounting the wall bracket it was not going to be perfect. But on the wall it was about 1/4" off level. Then we discovered the leveling adjustments! Since the TV-side brackets hinged out we had enough room, barely, to access these. However, if we'd relied on the supplied allen key to adjust them we'd still be making the adjustment. An allen stock bit in a ratchet made the job manageable. AND, we were able to get the bubble in the level perfectly in the center. I think part of MY problem was the whole bracket seemed so simple and straight forward I did not read the instructions as thoroughly as I should. I MAY have saved some angst. At the end of the day, mounting the bracket to both the TV and wall was dead easy. Getting the TV on the wall was only difficult because of the size, weight and height on the wall. The two bracket components aligned and engaged easily. Adjusting the mount was easier with extra tools. In fairness, I would not expect Echogear to include a ratchet, but the allen bit would have been nice. Echogear did a very nice job of packaging the mount, instructions and hardware. The instructions were PRINTED, not something I had to download or read online. THANK you! The hardware was packaged in clear plastic pouches strung together. We rolled out the hardware so we were able to see what was in each pouch making the parts very easy to inventory and find as we worked. NICE! Echogear also included a very nice template printed on sturdy, but not stiff (good thing) cardboard with instructions printed right on it. Again, NICELY done. Conclusion - Honestly, I was a little worried it would support the TV given it's size and weight. That just was not a problem - at all. It is more than capable. By the way, moving the big TV around on the mount after it was up and secured was also very easy. AND, it is very sturdy. It does not move around like the size or weight are a problem - at all. Echogear did an outstanding job of making this an easy DIY project. If you're thinking about wall mounting a TV, THIS is the mount and Echogear did a great job with the design and making the job as easy as possible. When their ad read: "Ideal for Mounting A 40"-85" TV Above A Fireplace." they were NOT kidding. Very highly recommended product and company. Would encourage anyone to purchase.

I recently purchased an LG C4 77-inch TV, and finding the right mount was quite a challenge. With the TV's size, my viewing distance, the mounting height, and the need for easy access to wires behind the TV—plus accommodating a soundbar—it felt like an endless battle trying out different combinations. Disappointingly, even some of the $300+ mounts didn't meet my needs. Then I discovered this mount, and it was a game-changer! The wall plate is sleek and easily fits below the plug sockets, allowing for a lower mount height (check out the photo). The extension arm makes accessing the wires a breeze, which is a huge plus. The instructions were incredibly clear, and I appreciated that this mount came with the 35mm mounting screws included. What I love most is the overall flexibility this mount offers, all at a nominal price. For anyone looking to mount an LG 77-inch TV along with an LG soundbar, I highly recommend pairing this mount with the ELIVED Soundbar bracket (the longer version)—it's the ultimate combo! The only minor drawback is that I wish the mounting arms were a bit longer to allow for more height adjustments. In the photo, you can see the lowest position possible. Overall, I am extremely satisfied with this mount and would highly recommend it to anyone in a similar situation!

Use this product to hang a 65" LG tv. It was a lighter one, about 45 lbs, so the weight limit wasn't really tested, but it was installed on a stone facade above a fireplace without issue - the multiple connection points was very useful for this purpose. The TV has been held sturdily, at the angle we want, without issue since hanging, which was roughly 2 weeks ago. The only challenge we had with this product was that once you get the bracket on the back of the TV onto the bracket you put on the wall, it's very difficult to slide it left-right. The recommended adjustment is simply to remove the TV and re-hang, but given the weight of a large TV and the potential challenge of where you might want to hang it, you tend to want to try to do it right the first time. You do have some left-right play with the adjustments, so you don't necessarily have to slide the TV along the bracket as long as it's close, but it's fair to say that right/left adjustment can be a challenge, depending on where you hang it. However, I have no other issues to complain about; overall, if you need to hang a large tv at an angle, this product will definitely do the job. Final note - I will mention that the instruction manual and diagrams were well written and even entertaining. So kudos to the manufacturer for their customer service.

I don't go out of my way to review many products, but this Echogear mount deserves all the hype and credit. After spending a good chunk of cash on a new 65" LG OLED65CXPUA, I wanted to ensure the mount I got was a quality build, easy to install, and good value. This one definitely checked all those boxes. I've had other mounts where the bracket attached to the wall is comprised of separate pieces of flimsy metal - not this one, the mounting bracket is one solid piece of sturdy metal and plenty wide for placing between studs. The true genius of this design though is the ability to level your tv after you have committed to drilling holes in the wall and mounting your tv. The adjustments for perfect leveling are easily done with the included tool and if you are organized and ready, you can probably finish a install with the help of a friend within 15-30 minutes. The extension and tilting action are smooth and steady making access to cables or finding a good viewing angle a breeze. And Echogear goes way out of their way to make the product experience enjoyable from quality packaging, humor-packed instructions, and a variety of hardware to ensure the mount is compatible with your tv. With all that said, I'm actually kind of stunned at the reasonable price of this product as there are many lesser-made mounts at this price point or higher. Couldn't be more pleased!

I got this to hang my new Samsung 65" S95C TV (High rated OLED.) It's a nice system and it works fine. It's MUCH less thick and sturdy than my old plasma mount (from Chief in Minneapolis) but the TV is much lighter. This mount seems more than adequate. The wall bracket was easy to mount, as I was able to use two of the old mounting holes. Drilled two new ones. Hanging the TV was likewise fairly easy - a two man job for sure - and the mechanism resembles a french cleat. The TV part of the system hooks onto a rail that allows for easy horizontal positioning just by sliding left or right before tightening the security screws. Vertical positioning depends on how you mount the TV brackets. That's where I discovered the Samsung has a design flaw, IMHO. The cable (which carries both power and all signals to a separate box) exits the back of the TV and points directly at the nearby bracket. Why didn't they point it down?! Anyway, mounting the bracket is made more difficult than it should be because of this. These brackets have a tilt mechanism that happens to point right at the Samsung's cable port. It all works out and I'm completely satisfied with it, but if you have a similar TV it might be worth looking at other options.

I am not a big writer of reviews as the day after I receive an item is way too soon to be asking for a review of the item and it's very annoying. There are so many fake reviews out here on Amazon that it's a crap shoot as to what is real, it feels. With all of this, I'm going to tell you that this is by far, the best, most complete and easiest mount I have ever installed. Do not listen to any negative reviews as they probably didn't follow the simple directions which are not entirely necessary if you have half a brain. They are great though. The mount hss the template that is spot on. Level it, tape it to the wall and you are 99% finished with the brains part of this process. Drill your holes, hold your new mount up and use an impact drill to tighten your bolts down. Screw the hangers on the back of the TV snug, not overtight ( which side up, only 1 way makes sense here). I took a couple mesurements on the back of the TV as to where center was ss to how low from center the TV would hang below the mount. If the height is where you want it, or is allowed, then hang the TV. Insert the screws on the bottom, make sure the TV is level and then tighten those screws. If one size is lower than the other, lift the one side of the TV a little and screw the appropriate side in further. It's that simple and really couldn't be more simpler. The mount has a great swing out feature to allow access to the back of the TV where the connections go. Adjust your angle, tighten up the knobs, and swing it back to the wall. The bottom of my TV is 4 1/2" from the front of the TV to the wall. There you go. My honest opinion of a great product. Highly recommend and will buy again should the need arise. I hope this helps someone.

This is the first time I've ever hanged a TV on a wall and I'm glad I went with this mount. The mount itself is a sturdy, thick gauge metal. The included hardware and spacers worked great to attach the brackets to the TV. The width of the mount and multiple mounting holes made it easy to attach to wall studs that aren't exactly centered over the spot you want the TV to be. And the included template that's printed on cardstock (and not some thin, easily torn paper that was folded up) was perfect. The ability to tilt has been helpful to position the TV exactly how I want since I have the TV mounted above a fireplace. The ability to also extend and swivel has greatly assisted in being able to reach behind the TV to reach cables entering/exiting the wall. Pro tip: They say you can install this in 20 mins, but really you should take your time to find the studs and double check you're going to drill those lag bolts right into the middle of those studs. So invest in a good stud finder, learn how to use it properly, and don't be afraid to drill small pilot holes to double check for the stud edges so you can find center line of those studs.

This was exactly what I was looking for. I ordered two of these mounts. One was for a 55" TV in the bedroom and the other was for a 65" above the fireplace. Installation could not have been easier. I should mention that both of my installations were into wood studs. The kit came with all necessary screws and bolts. In fact, there were a number of different screw widths and lengths to account for different TV's. There are a few basic tools that you will need to have on hand including a drill, drill bit, level, stud finder, tape measure, and socket wrench. Honestly the part that took the longest was measuring to make sure the TV was at the correct height. From there the included template made it easy to ensure that bolts were aligned property in the studs. Attaching the brackets to the TV was easy (just be sure to look closely at the picture to make sure you have the brackets on the correct sides). Hanging the TV on the bracket was straight forward but make sure that you have someone else to help you. Fine adjustments left or right was easy once the TV was up. The tilt feature is great especially for the TV above the fireplace. I would highly recommend this product given the quality of materials, quality of instructions, and the price.

Absolute awesome value for money and quality! Easy to install with supplied fixings. I added timber battens to bring it off the wall to allow for a plug behind. We used this on sky glass 2 and it works fine. The spacers are not quite right as sky would obvs like you to buy theirs, but it does the job. Was not willing to pay £100 for a sky wall bracket. Very happy!

Good quality, easy install and funny manual.

This TV mount blew me away. Comparing the price of this one, to something you'd get from retailers like best buy and walmart, the value you get is amazing. Starting with the packaging and installation manual, you can see the care and quality right from there. Box was really nice, interior of the box has really cool designs, and the installation manual actually has funny stuff in it, and is straight forward and makes sense to follow. This mount even comes with a drill template which is a huge bonus, always helpful to have and every mount should include this. Box has everything you could need for any type of TV, you end up with a lot of spare parts you won't use but that's so that the mount works for vast majority of TV types. It's sturdy, and the vertical tilt, horizontal tilt, and extend (from the wall) functions all work great with a good amount of tension behind them. Absolutely recommend.

Simplesmente o melhor suporte que alguma vez usei. Vale bem o dinheiro que custa. Esta marca está acima de todas as outras.

As soon as I opened the package I knew I bought the right product. First thing I noticed was the package weight indicating the material inside was made of solid steel (and the packaging material itself was pretty cool too).Once everything was unpackaged ECHOGEAR provided everything that was needed (plus more) for the install. I had multiple screws and spacers for all different types of TVs. The manual was clear and easy to understand, they even have videos you can access if you need more help. Once installed the TV (65 inch) swivels easily and accommodates the viewing angles we needed. No wonder there are so many 5 stars reviews for this product. I highly recommend this product for anyone considering to purchase a TV mount.