BESSEYSTC-HH70 Horizontal Auto-Adjust Toggle Nickel Plated Clamp, Silver

I used this to attach a small infeed extension table to my table saw rip fence rail, and it works flawlessly. Its a high quality clamp, made with thick steel and has fine adjustment. Clamping pressure is quite strong, I am pretty sure my extension table I made would break before the clamp did.

Works as intended.

With just a bit of hand pressure you can use these to clamp down long boards during cuts that would normally be hard (or impossible) to hold. I have three mounted to my bench, they work great, and it's easy to adjust the height and clamping pressure.

I bought a pair of these for my drill pres. I was tired of the metal flinging from my hands. I wanted something easy to use, but it took a while to get it the way I liked. The biggest problem is, it lifts t track out fast. I had to use screws with nuts to keep it from doing that. And you must keep all hardware in the front. Or it will bend itself or the thing its attached too.For me, I used a heavy plate steel I had around, and put a screw in the bottom, using a nylon nut in that really hard to get at hole they included in the center, so I can swivel the clamp. The rest I used some bar metal to slide into my track. That set up works, but the controls are fickle. A tiny turn of the screw makes it either possible or impossible to close. And there is no large knob like they had on older models. Its an allen key, that isn't included, and you have to keep it around so you can adjust it if needed.I would have liked to see a longer shaft as well. I can't just change it because I need a ball head to make that end work. So I have to add wood to make it longer which isn't ideal in all situations. It could have also used padding on the lower part too, its sharp. I had to print a tpu cover for it, looks better, and its easier to use. Not cold there either.

I am a professional woodworker and I bought these for my business to use with a router/shaper coping sled that I am building.Buy if (1) you want to use these in a jig/fixture that will get used for many repetitive cuts, or production work (2) you need to hold material of different thicknesses (3) you want to adjust the hold down pressure to protect delicate materials.Don't buy if a regular toggle clamp will work for your application. Especially for infrequent use, and where all the material is of the same thickness. Many thousands of people have managed to scrape by and make a living using regular toggle clamps, before these came along.I bought these since I wanted the best I could get, as am using them in a production environment. I am satisfied and they certainly hold the material tight.Tip of the Day: Place strips of PSA (adhesive) backed sandpaper on the surface of jigs/fixtures to greatly enhance the hold down abilities of toggle clamps. If you really need to hold a part securely and simply cannot risk having something come loose (aggressive cuts on a shaper come to mind) use a couple of screws placed in a concealable location in addition to your toggles.

works as expected

Attached these to a 4080 aluminum extrusion to create a DIY Monstertech table mount(4) 13032 40 series M6x1.0 Self Aligning Roll in T-Nut(4) M6x14 Socket Head Cap Screw

Strong clamp

Macht was es soll

BESSEY ES SINONIMO DE CALIDAD Y PRACTICIDAD, EXCELENTE PARA TRABAJOS SOBRE EL BANCO DE TRABAJO PARA SUJETAR PIEZAS EN MI CASO DE MADERA, ALTAMENTE RECOMENDABLES

Köpte två men bara en fungerade som förväntat. Det blev retur av den trasiga.

Works well

Im a fan of other bessey clamps due to how smooth they operate vs cheap clamps.This one works just fine as well, but honestly nothing special about it. So, in my opinion, this is overpriced compared to cheaper options as well as other bessey clamps.