---
product_id: 87388004
title: "Niagara Cutter N86032 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 4\" Overall Length, 1.000\" Cutting Diameter, 1.000\" Shank Diameter"
brand: "niagara cutter"
price: "₨161629"
currency: LKR
in_stock: true
reviews_count: 8
category: "Industrial"
url: https://www.desertcart.lk/products/87388004-niagara-cutter-n86032-carbide-square-nose-end-mill-inch-tialn
store_origin: LK
region: Sri Lanka
---

# Niagara Cutter N86032 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 4" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter

**Brand:** niagara cutter
**Price:** ₨161629
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** Niagara Cutter N86032 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 4" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter by niagara cutter
- **How much does it cost?** ₨161629 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.lk](https://www.desertcart.lk/products/87388004-niagara-cutter-n86032-carbide-square-nose-end-mill-inch-tialn)

## Best For

- niagara cutter enthusiasts

## Why This Product

- Trusted niagara cutter brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Size:1 in
            
          
          
        
      
    
  


        
        
     
	       
     

     
                              
     
       	       
        
         
        
        	
        	
        		
        			The Niagara Cutter C330 TiAlN-coated carbide square nose end mill has three flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool&#x2019;s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The end mill&#x2019;s three flutes provide better chip-carrying capacity than four flutes and a finer finish than two. They efficiently remove excess material from the cutting area and provide a third cutting edge to create an improved finish that may eliminate the need for a second finishing cut in some applications. The 30-degree helix angle supports general-purpose applications. It balances lower angles&#x2019; strong cutting edge for difficult-to-machine materials with higher angles&#x2019; increased cutting action. The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness for abrasion resistance and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0.000&#x201D; to -0.002&#x201D;. The round shank accommodates a variety of holders.  End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool&#x2019;s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.  Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

## Features

- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Square nose end mills (also called square end) create sharp, unrounded cuts
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings
- Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

## Images

![Niagara Cutter N86032 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 4" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter - Image 1](https://images-na.ssl-images-amazon.com/images/I/41-oRw5-vsL.jpg)
![Niagara Cutter N86032 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 4" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter - Image 2](https://images-na.ssl-images-amazon.com/images/I/319UJl5P--L.jpg)
![Niagara Cutter N86032 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 4" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter - Image 3](https://images-na.ssl-images-amazon.com/images/I/419s57sXdSL.jpg)
![Niagara Cutter N86032 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 4" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter - Image 4](https://images-na.ssl-images-amazon.com/images/I/31FGdxmyr8L.jpg)

## Available Options

This product comes in different **Size** options.

## Customer Reviews

### ⭐⭐⭐⭐⭐ Thank you Niagra!
*by S***A on June 18, 2018*

High Quality, precise cut, excellent finish.  Started out with a tiny bit of stuttering (perhaps it was cold).  The next (warmer) day I coated it with Molybdenum spray/powder and it far far exceeded my expectations. I also used a thick cutting oil then a thinner, at each alternating depth. It ran quite well at multiple RPMs, once I learnt its particular "style".  It excelled making fast, small, circular passes at moderate RPMs -- and it melted hard aluminum like butter. I kept checking the bit between depths and it never even got warm to the touch!  Making various passes at various speeds, I was able to try a variety of cuts and cuttings from tiny powder-like to large slivers, all without slowing down, stuttering or leaving rough machine marks. The finish on the final piece is amazing -- mirror smooth.  this is in a much higher league from a previous carbide bit I was using.

### ⭐⭐⭐⭐⭐ Great Mill To Get The Job Done
*by A***L on January 11, 2014*

I have been using this is one of my main mills to do cuts in everything from hardwood, softwood, and MDF on my 4 x 8 CNC table. I find that this mill gets the job done, even at high RPM and feedrates, where other mills get chatter.The mill has never had an issue with going through material, giving me great finishes on cuts, and I turn to this mill for a lot of designs because you can get into the corners on more intricate designs that a larger end mill would not be able to do.I would recommend this mill for your go to tool when doing a good majority of wood work. It has been through more than 50 jobs and is still sharp and ready to run.

### ⭐⭐⭐⭐⭐ This Square nose end mill cuts aluminum well. Used ...
*by C***O on August 24, 2014*

This Square nose end mill cuts aluminum well. Used for several parts beyond what could be counted and continues to cut as new without any chipping. I will say the coating does appear to wear off fairly quick however it does not impede its ability to cut.When the cutter is used to cut Carbon Fiber (Not recommended) The blade dulls after about 3-4 parts. Should more aluminum parts be attempted after the carbon cuts it tends to push material out of the way vice cut. Again this is no fault of the cutter as it is not intended for carbon fiber use. When used as advertised it works well and lasts.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.lk/products/87388004-niagara-cutter-n86032-carbide-square-nose-end-mill-inch-tialn](https://www.desertcart.lk/products/87388004-niagara-cutter-n86032-carbide-square-nose-end-mill-inch-tialn)

---

*Product available on Desertcart Sri Lanka*
*Store origin: LK*
*Last updated: 2026-01-28*