SamaN Interior One Step Wood Seal, Stain and Varnish – Oil Based Odorless Dye - Protection for Furniture and Fine Wood (Ebony SAM-318, 8 oz)

I love this stain! goes on easy and dries quick, leaves a nice soft warm glow. Wasn't sure if I could use it on my hard wood floors but I gave it a try. They are beautiful! and the finish is holding up great. I have had both plumbers and electricians walking on them with ho problem. I have moved furniture around without scuffing my floors. I sandaled and stained my baseboards and doors and they came out beautiful. I loved that I didn't have to buy a stain and sealer separately. One coat covered everything. The only problem was if you get a drip brush it in quickly because it dries fast!, All you have to do is be careful and neat about applying the stain

Easy to work with and color is spot on and sooo gorgeous. I did 2 coats on this small antique dresser that I dry brushed off and I’m amazed at the results. Very happy!

On very hard maple sapwood, I have had much better results applying this product with a lint-free rag (along the grain, working fast) than a with a brush, counter to the manufacturer’s instructions. I have had no blotching, which is amazing with this particular timber. I also find that I can do additional coats after only five-to-ten minutes this way, also counter to the manufacturer’s instructions. I am doing a dark color; four coats gets me there.

Worked fairly well. Covered the wood without streaks. Nice even color. Only issues is with the sealing component. Its seem like it didn't sealed well ie. surface should have a clear sheen to it. So I slapped on a coat of clear. I was hoping I wouldn't have to.

El color que pedí

I love this product! Struggles with what to do with sun damaged cedar window sills. Followed instructions and some youtube videos. Am very happy with product!

I used this to stain some 2x12 inch maple boards being used as shelf risers inside of a cabinet. Honestly, I just bought this product because it was the cheapest all-in-one stain I could find. I was pleased with the result. The color was exactly as pictured in the Amazon listing, a dark warm walnut. I put on 4 coats and waited 2 hours in between each. It is a milky color when it’s wet but dries clear. You definitely need multiple coats to get a rich color. This product worked well for my small project. The color ended up matching the stain inside my cabinet perfectly.

This stain description says its an oil based stain..it is not..it has very little open working time that any overlap causes double color and you cannot flow it out..if it was indeed an oil based stain, you would have a longer working open time..longer than a few seconds

Perfect colour for my sewing desk which was previously varnished. I roughed it up a little then applied the stain. Coverage is amazing. One coat does it but wanted a bit darker so I chose to do two coats. Dries quickly. I did our oak kitchen table & chairs a couple years ago with SamaN. Turned out beautifully. This is the best product for your projects. Soap & water clean up. Highly recommend.

I chose this SamaN interior one-step wood seal, stain and varnish for use on a herringbone on-edge plywood side table that I'm building. Being a living room piece that would be exposed to light moisture from beverages or plants, I wanted a stain that wasn't too strong in odour but would still offer protection from occasional light moisture. This stain has thus far worked really well. I'm very happy with the finish of the "antique" tone after having applied a single coat. I'm about to do a second coat after sanding. There was indeed some grain raising after the first coat but some light sanding should take care of that. I'm amazed at how low-odour this product actually is. If I didn't know better, I'd think this was water based as compared to my Varathane stains, this has very little to no odour. Great product thus far, I'll certainly try SamaN again for my next choice of interior stain.

It is overall a satisfing experience and product. Easy to apply, low odors. However, because it is a stain with vanish, the first coat did the stain on the wood and it cannot be change later. For the first coat, any uneven painting, or more paint from one area than the others will cause the wood color look uneven, and there is no way to fix it. Because it is stain and vanish all-in-one formula, stain on second coat is blocked by the first coat, which cannot reach into the wood. I was making this mistake, then try to correct the color my applying multiple coats, and that does not help. What makes it worst is after 3+ coats, perhaps its too much, somehow makes the surface of the paint feel sticky, no matter how long the paint is dried.

Looked in all the big stores for this color . Couldn't find it . But I found it here . It's a perfect match thank you

Got this to refinish an "orange" pine desk that was built for me by my father 20+ years ago. I wanted to try this stain+poly on an unprepped desktop...meaning no sanding at all. The desk was originally just polyurethane on pine. Turned super orange over the years, and has worn thin in spots. All I did was clean the desktop with distilled water, and then apply this Saman product with a cheap "10 for $1" kitchen sponge. I used the "coffee" color. I applied thin layers, about once an hour, for a total of about 6 thin coats of the stain+poly. It turned out way better than expected. Wood grain shows through. I love it. It's a hair tacky for a few days, but so is all poly, in my experience. I put my computer and monitor on it only after about 12 hours of dry time and nothing stuck to it or left any marks. This is one of the best products to update old furniture with minimal effort or cost. $10 and my desk looks like it will last another 20 years.