Color:370F-95  |  Special Features:3 Phase  |  Maximum Flow Rate:48 Gallons per Minute  |  Size:1" NPT Female Suction, 3/4" NPT Female Discharge Port This AMT straight centrifugal pump has a cast iron housing with a discharge port that rotates in 90 degree increments for flexible installation. The pump housing has a self-cleaning impeller that handles semi-solids up to 1/8" diameter, a fill and drain plug for easy servicing, a pull-from-rear design for servicing without disturbing any pump housing connections, and buna-n mechanical seal and O-ring. The motor enclosure is TEFC (totally enclosed, fan cooled) for protection from dust and indirect water spray and complies with National Electrical Manufacturers Association (NEMA) 56J standard for mounting dimensions. This pump requires flooded suction for priming and is suitable for use in applications such as liquid transfer and recirculation.SpecificationsMotor0.33 to 1.5 hp, TEFCPumpCentrifugal, not self-primingMaximum flow rateRanges from 33 to 80 gpmImpellerStainless steel, self-cleaning, semi-openSuction portRanges from 3/4" to 1-1/4" NPTDischarge portRanges from 1/2" to 1" NPTMaximum operating temperature180 degrees FStandards metNEMA 56JPumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump's movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system. Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel.American Machine and Tool (AMT) manufactures centrifugal and diaphragm pumps. The company is headquartered in Royersford, PA.
T**R
Great Value
Well made, quality pump and a really good value because it is fully enclosed with a built in cooling fan. I have an outside application which is contained within a concrete box, but have had to periodically replace pumps. These pumps all had their motors open vented with no cooling fan. Yes, these motors claimed to be drip resistant to water but the first indications I would have of a pending failure would be constant overheating. I have examined this pump and there are no vent holes so the fan simply blows air around the entire closed housing. It also has a label on it rating it for outside use so I expect chances are very good this one will last for me.UPDATE:My pump motor stayed completely under water for almost a week during Hurricane Harvey and it never failed. I let it dry out before putting power to it and then initially only ran it for short times. I was afraid water had penetrated into it and I wanted a little internal heat to help with any drying. In any case, It is now running on an extended basis with no problems, so far.
R**D
Happy
Great pump great price.
Trustpilot
2 weeks ago
2 days ago
