Zigtiger Dimmer Light Switch Led Dimmer Switch 3-100W Led Dimmer Switch 1 Gang Dimmable LED Incandescent Halogen Bulbs/White

The Zigtiger LED Dimmer Switch in Antique Brass has exceeded my expectations in every way. Its seamless combination of vintage aesthetics and modern functionality instantly caught my eye. Installing it was a breeze, especially since no neutral wire was required, making the process hassle-free. This 1 Gang 2-Way dimmer switch is a versatile gem, compatible with a range of dimmable LED lights, incandescent bulbs, and halogen fixtures, accommodating wattages from 3 to 100 watts.The dimming performance of this switch is nothing short of impressive. The trailing edge technology ensures smooth and flicker-free adjustments, allowing me to set the perfect ambiance for any occasion. Whether I'm unwinding with a soft, warm glow in the evening or brightening up the space for a lively gathering, this dimmer switch offers unparalleled control. What truly sets this apart is the attention to detail in its design. The antique brass finish adds a touch of sophistication to my home decor, turning the switch itself into an aesthetic statement. If you're searching for a dimmer switch that marries style and practicality flawlessly, the Zigtiger LED Dimmer Switch is an absolute winner. It's now an essential part of my living space, providing the ideal lighting atmosphere with an exquisite visual appeal.

Like most of these dimmers can be a bit of a faff to set min brightness, but has proved reliable in use.

I used this Dimmer Switch for my Livingroom Lights and it works great and there is no flickering with my led bulbs I have in my light fittings really impressed with the Dimmer Switch and I got it delivered very quickly by using Amazon Prime as well

So, I literally just fitted this switch in my daughter's bedroom and the dimmer worked great. No buzzing or flickering, worked perfectly!I then tried the push function to switch the light off, and it didn't work. The switch seemed to be bottoming out on the surround before actually switching.I proceed to press the switch a little harder until it actually switches and turns the light off. Then I have the same issue turning it back on!I decided to remove the face plate and slacken the retaining screws slightly. The push function now just about works, but the light no longer dims!!!Literally broken within 5 minutes of taking it out of the box!On inspection, this switch seems to be very flimsy and either badly designed or quality control missed this one. If pressing the switch a bit harder to make it work as it should is enough to break it, it doesn't seem fit for purpose, to me. Incredibly disappointed.

This dimmer switch fits easilly in an existing light switch pattress box, and connects to the existing 2-wires (live and switched, no neutral required). This means it takes only a few minutes to fit and get operational. I purchased it to replace an old dimmer that had been installed by the previous owner, when the ceiling lamps it controled were all incandescent, and therefore took more than 180Watts. When modern low-energy LED bulbs were fitted, the old dimmer struggled to work properly as the power consumption was now low (circa 20W), so the dimmer caused flickering. The new Zigtiger dimmer worked a treat (it can control loads between 3 and 150W). A further benefit was that the old dimmer needed to be rotated for the on/off action (click). My wife has arthritis and struggled to rotate it past the 'click'. The Zigtiger dimmer has a push-on / push-off action and is thus much easier for her. The dimmer rotation is also very easy and smooth. Recommended!

I used this item to replace a malfunctioning dimmer switch on a bedside light. No problem with fitting it. When it came to actually use it, I found that it was a bit 'iffy' with the on/ off function press function.I then took of the knob, and had a look and it, and it appeared to me that the internal 'clamp' was a bit long tbh. I inserted a very small piece of packing into the centre of it, which then allowed the 'doctored' knob to work the on/off function without any problems.In the photo, the knob from the old switch is at the top, and you may be able to see there is an internal 'bar' inside which reduced the internal barrel length. In the new knob there is no 'bar' to do similar. So, if you are having problems with on/ off function, try a thin bit of packing and see if that solves your issue.

Very good switch. It was easy to fit and works well. I liked the way there is some adjustment when you set it up first time

It was easy to install and it looks and feels good. It gives a decent range of brightness of my LED bulbs. The only issue is that, sometimes, the brightness of bulbs may start changing over time without any input; it would get slightly brighter for a few seconds, then reduce back, then get slightly brighter again, etc. I noticed this on low settings. Slightly turning the dimmer usually fixes the problem.