XS-EC6-GRN Pre Mixed Low Conductivity Coolant, UV Green 1 Litre

Initially, this coolant split into foam and blue coolant however after 4 or 5 days the foam reduced as the air moved through the system. More coolant was added and now the coolant looks as it does when it is poured.The temperatures are as expected with water-cooled system. I suggest handling with gloves on as this stuff will stain your skin.Other than that it looks really good and works well.

i won't use anything else now, have refilled my system around 3 times with this UV clear and i don't feel it can be beat.My temps noticeably reduced, and i have minimal cleaning between refills, if at all. it lasts for months at a time and is reasonably priced for regular maintainence. i haven't noticed any staining in nearly a year on the same tubing. although it has started to dull so i'll replace as wear and tear.i thoroughly recommend!! just make sure you properly clean your system out of all other coolants and chemical beforehand as i did

i haven't use yet , i give 5 star but hope is good and not broking the engine or radiator

I use clear and I add a little pink dye as that very much helps you to see there is liquid in your tubes.It drained out a GPU waterblock leaving it pristine silver.It's a great advantage to this liquid that you can pour it down the plughole.

Great liquid, really Glows! After buying the disappointing Mayhems UV Red which did absolutely nothing, i put this in the loop and it looked great, very UV Reactive, lets hope it lasts a long time! :-)

I have had this in my system for a couple of months now, the solution hasn't separated or anything like that and still cools my system efficientlyI have had it in a few months and had to drain my loop the other day, i couldn't see any residue in the pump or cpu block.I didn't notice any change in cooling when switching from pure water to this, if i was building another pc i would i would buy this again.

So after I had flushed and cleaned my loop out I filled up with this, pump was running for about 36hours to bleed. All seemed good until I booted up about 12 hours later and my cpu pump didn't start. A full strip down revealed the pump was all clogged up and the coolant had a blue tinge to it. Avoid this stuff

This stuff is hard to get hold of from any local stores, great product. The only downside is that it looses uv reactive properties and fades out quite quickly. Does the job very well for cooling in comparison to other brands

Started using this around 2018/2019 and now have used it in two machines. And I moved and didnt get a chance to change fluids in my rig for more than a year and didnt have growth or coloring of PETG tubing. Stuff works great and the green glows in black light really well (which also helps detect leaks)

As long as it can keep being cheaper than other opaque coolant competitors, i'll keep buying this stuff.It looks amazing, and always flushes clean as long as i run a few gallons of DI water through it, and runa bottle of SYSreboot from primochill and follow their instructions. Great fluid overall, I replace the fluid every 6 months. I've never had build up, separation, or color change. I even run dyed fluid in between the white, the SYSreboot and some primoPREP really make the difference.

Kinda wishing I had a UV light to test that feature about this coolant with.While I do typically lean on the old-school side of liquid cooling by trying to stick to distilled water and a silver coil to keep things clean and affordable, I can't knock this premixed coolant for performing well and looking good in the system.From my own testing with this and the solid white variant, this premixed is maybe 2 degrees Celsius warmer than just pure distilled. That said, I also drain and use new (soft) tubes and coolant every six months on my present loop. Aesthetically though, it's hard to beat. The UV blue does blend in with some colors of RGB lighting more, but stands out even more against other contrasting and complement colors. It's worth experimenting with if you're going for a themed look.My one bit of advice if you are considering this stuff and haven't done colored coolants before? be comfortable with running a loop with distilled water first before giving this stuff a spin. And you might want to run a "service cycle" of distilled and some kind of biocide (what the silver coil was for) before changing colors. Knock on wood, I've yet to have any problems with my blocks or o-rings on components doing it that way.

Eviten este coolant, de plan genero un caos, mancho de forma permante mis tuberias y mi bloque de la tarjeta

Je ne connaissais pas cette marque, de base j'étais sur du liquide Corsair.La différence à été notable pour moi en idle je suis passé de 35 à 25 degrés (température du liquide).Je ne peux que recommandé !