Silcoset 158 Oven Door Adhesive Silicone High Temperature Resistant Glue

Nothing to dislike.It did exactly what it said it would do. The instructions & photos provided made the task easy to understand & clear to follow.I’ve got my oven door working perfectly. THANK YOU!

The internal glass window fell out of my Zannusi oven,this glue reattached the glass without any problem.it has no instructions but,clean all surfaces so no grease or fats remain on the glass or oven frame.apply to the frame as if putting toothpaste on a brush and don't flattenlower the glass onto the adhesive and press into place you will see the contact points on the glass.put a weight onto the glass to hold it down and leave to cure for 24hrs to make sure its cured.and there you go.there is ample in the tube for a good fix without leaving any gaps.highly recommend and would buy again if i ever need to

Bought this as I unfortunately broke the inner glass of my oven and can’t get an original replacement. The product did not have a challenge as an adhesive as the broken fragment of glass was also held loose by the door fitting, but nevertheless it had held the glass together and has not come adrift. It certainly had coped with temperature of 200degrees Celsius without issue. Application is not particularly straight forward if you are fussy for a neat joint and they could have provided an applicator of sorts to help. In addition the adhesive/sealant is black so you will notice it if the joint is in a visible position. In my case it is going its job and saved buying a replacement inner glass panel so I am relatively pleased.

The package arrived on time and was used to re-fix my glass, oven door to it's hinges. I couldn't have hoped for a better outcome. I found it low odour and it really has sealed nicely. I removed all of the old silicone first and left it overnight to bond. The oven temperature is now much better.

did what it said on the tin, i.e.worked well

Yes did the trick worked

This fixed an inner glass panel on our oven. It was very easy to use, although as others have said there are no instructions, there are however lots of ways of finding out what to do. The adhesive came out of the tube very easily, although it is quite thick. Best to use a thicker bead, in order to ensure there is a good seal all around. It goes without saying that the surfaces should be scrupulously clean. Although it is touch dry relatively quickly, leave it a full 24 hours for it to fully cure. Any excess adhesive can easily be scraped off after the initial touch dry period. Might be a tad more difficult when it is fully cured? I read many 1 star reviews, which nearly put me off, but I am confident many of them failed because they didn't do the job properly. Although some have commented about it being black, if it is applied correctly, you will not see any of the adhesive when the door is put back together.

Had a broken glass oven door that had come away from the metal frame - tried other products that were useless. This worked 1st time ( left overnight to cure) and has been fine now the oven is being used. Would recommend