U-MAX 5x3ft Metal Shed,Garden Sheds and Outdoor Storage with Lockable Door, Small Outside Storage Box Waterproof for Backyard,Garden,Grey(Base Size:150x86CM)

Instructions were awful but after contacting the seller and getting new instruction shed is up

The instructions need to be updated to be more clear regarding how to roof fits to the frame…. When completed my one left gaps that allowed water to ingress into the shed and down the back panels… had to buy filler to stop it from happening.

Shed is Hard to put together. I have put many sheds together. This one is spot on however, every single screw hole is perfectly aligned. Very unusual, normally you have to drill 5 to 10 new holes as they just don't match up. Screws and bolts are just too small. They do this so no one gets a poke from a screw or bolt when entering the shed after installation which would result in buffoons' having a law suit. Engineering is spot on, but still very difficult to install, Takes 2 people, and I cant stress enough to watch the videos several times b-4 assembly. When assembled is a sturdy good looking shed. Pour a slab to mount it on and use 4 tap cons and washers to affix to pad. Protective plastic covering is EXTREMELY difficult, I took a razor knife and ran it down the edges of the panels to be able to remove the plastic, Good Luck,,,,, Buy it, it is Worth The Work! It is a lot of Work however!!!!

First of all, O-M-G, You better be prepared to put this together!!! It took 9 hours, no breaks... there were 2 of us and sometimes 3, to hold all of the pieces while drilling at the same time! If you can afford to pay a couple of guys (who assemble things regularly), I would HIGHLY recommend that! We're used to putting IKEA, Walmart and Amazon DIY things together, but THIS was the MOST DIFFICULT thing (by far) we've EVER put together!!! Here's why: the worst of it are the screws, they are SO TINY (all 3 different ones that go in all places) that they REALLY play "heck" on your fine motor skills, so you end up dropping them (A Lot) and have a really hard time holding them while trying to drill them in, No Joke! And then you have to wonder, because they're So Small, are they gonna hold this whole thing together and hold the door on for the long haul... like, for a year or years to come??? Then they send a pair of gloves in the pkg of tools for a reason (but only 1 pair), so someone else, who may be helping, is at risk of getting cut by the steel edges... I learned that first hand! Was cut several times by the steel edges, very fine, SHARP edges! So have a 2nd pair of garden gloves or something similar for the other person on the hand that's Not holding the screws... Then, the steel panels are very wobbly/flimsy and thin (of course because the whole unit is not expensive and total weight is 74 lbs) so when you're standing them up and trying to drill in the bottoms and sides together with these tiny screws and drill them to each other and need 2-3 people to hold them while you're trying to also put these tiny screws through 2-3 sheets of steel and/or the frame or L bracket, it's VERY frustrating because you don't have a lot to work with and someone ends up holding up the panels or the bars around the top (which is the frame) for a long time which is grueling and tiresome! So, we did use the instructions and the video to make sure we did everything but some things were still "fuzzy"... like the bars on the inside of the doors, I took 2 pictures of them because the top one is put on correctly, but the bottom one is not, it does not line up with the holes in the middle... but nothing on the bar indicates top or bottom, you just need to make sure all of your holes line up. Then ALL of the roof panels hang over the edge of the shed, especially in back (by about 3-4 inches)... so again, you really need to look at your drill holes, because the directions or video doesn't do a good job of letting you know this. And then, of course, there's no floor, if you were wondering... so it's best not to put it on your lawn, unless you want to build a floor for it... we put it under our car port. So after all is said and done, I must say, it was still a good value for our money and it came out feeling really sturdy, not wobbly, the corners line up, the locking mechanism, lines up, the door lines up and feels sturdy enough and it was light enough to move into place! I ordered some metal glue that I'm gonna put on each screw, just because they're so small and I don't trust them to stay in place for the long haul, but you can do as you see fit! For now, it looks like it's gonna meet our needs and because it's way back, under the car port, it's away from the rain and most of the outdoor elements here in Florida.

Sorry, no video but this little shed is a great bargain. Item arrived in good shape and was packaged well. Of course it's a little difficult to assemble but it fit together well and you just have to take your time. All the parts were in the box that were needed to put this together. I only replaced 4 metal screws with longer ones because the screws that came were just to short in my opinion. Total assemble time by my self 10 hours, with two people this could be done in just a few hours. Looks great even my wife likes it!

BEWARE: NON-RETURNABLE, NON-REFUNDABLE, AMAZON WILL NOT HELP YOU! I was sent a much smaller shed than advertised so please see my pictures for measurements. My biggest issue is the door way height, I'm 5'5" and I have to remember to duck to get inside. Putting it together does take several hours and you will need to use the drill a few times but for the most part it went together as instructed. It's the same size as some of the other advertised sheds that are much cheaper so check the prices, this one was more pricey for no reason.Update: This shed is useless, I knock my head on it all the time and although I filled all the gaps with tuff stuff, water still gets in everytime it rains so I can't leave anything in there that can't get wet, what's the point of the shed? Do yourself a favor and get something more sturdy and practical.

We thought this to store our Traeger Grill out of the rain. It is great for that task… Though I would prefer a wider door.Assembly was fairly simple. Use some gloves because the metal is flimsy and can cut you easily. I put it together with no help, but you may need someone to operate a screwdriver on the other side when putting the final pieces on. All holes were correct and aligned.It stands well, and once put together seems substantial enough. Though I have reservations about the quality of the “stainless steel” screws. (They are not. Atleast not of any real quality.) Those screws have already obtained a crust of rust over them as I figured they would. If this lasts five years, all well and good. I wouldn’t expect it to endure humidity. As other “stainless steel” parts have spots of rust.We did put in a rubber floor. I also sealed the air gaps on the bottom and top to keep out wasps.Overall, you get what you pay for, just as I figured when buying.