Silverline770264 Hose Guide

Help keep my hose off the ground as I go to turn left or right.

The product can be improved by eliminating one of the rollers and provideing a slot in place of the roller. This will allow the hose to be dropped into the guide without having to remove the nozzle or water wand. Because the housing is structurally compromised, it will need to be reinforced with a metal piece to assure stability.

Works great .

works well

You can’t justify buying a branded hose roller for 4 times the price when these are so good! Excellent value. Does the job perfectly!

An extremely effective hose guide . It makes feeding the hose out or in much easier and faster

Great value and does the job and helping you get hose reel around corners.

Perfecto para dirigir manera súper contento con la compra

Easy to fit and works well to guide my hose, which is the auto retracting reel kind, out and in even though the hose reel is around a corner.Wheels seem to spin freely and the hose stays in the wheel groves without any issue. (I did place this in line with the hose reel exit to keep the path straight and give it an easy path.)A good addition when you need to pull your hose around a corner. Just be careful how you place it in relation to your hose reel to optimise the path when you are pulling the hose out.*UPDATE*After a few months use the wise was getting harder to pull across the rollers. What has happened is the plastic has worn away around the roller spindles allowing the roller to rub on the frame! I was going to send it back but have decided to try and fit some small RC model steel ball bearings to make it work properly and last longer. I will report back if this has been successful when I get some suitable bearings!**UPDATE 2**Well, the ball bearings I added worked for a while but as the plastic of the guide is so thin the bearings have moved, so the roller is now jamming against the frame again! Part of my problem is my hose reel is the automatic retraction type, therefore you need to pull quite hard to get the hose out. This extra force seems to put too much force on the roller bearings and causes the rapid wear.In summary, if you have a standard hose this may be OK but if you have a automatic retraction type then avoid, as it will not last, especially if used to go around a corner.